Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
XENTRY AIO FULL FIX [2023.09-R2 & 2023.12-R2] [UPDATED 21/12/2023]
|
19-01-2024, 18:57 PM,
(This post was last modified: 02-02-2024, 00:14 AM by CATAHA.)
Post: #146
|
|||
|
|||
|
RE: XENTRY AIO FULL FIX [2023.09-R2 & 2023.12-R2] [UPDATED 21/12/2023]
Yesterday i spend FEW hours to make it work and here is what i used and my findings
I downloaded 12.2023, Installed FRESH win10(with updates)(in VM Typical_recommended_Mode(DID NOT WORK), Custom(Option)/UEFI/Sec.BOOT_OFF/NVMe/1024Gb/1Cpu/8GB_Mem) Then i installed Xentry, Then i Used XENTRY.AIO.FULL.FIX_2023.12_R2-c0n (here and on other forums you could find) Then i edited .vmx file (isolation.tools.getVersion.disable = "TRUE") <<<--- To change ID from 253 to 252 MAKE SURE you hit ENTER AFTER YOU EDIT .vmx file, because .vmx have to have "1" empty line at the end of file, otherwise it WILL NOT WORK It worked on Main PC where i tested.... for power on.... Then i Copied to my diag laptop VM_FOLDER and it stopped working........ Then i ........ spend FEW more hours...(installing on diag laptop but external SDD) Then i Copied VM_Folder AGAIN to laptop main SDD and used AGAIN "XENTRY.AIO.FULL.FIX_2023.12_R2-c0n" fix and it worked on Xentry but not DAS... When i tested on Car(s) Xentry connect some of my device but DAS wouldn't connect to to cars.... So i spend FEW MORE HOURS looking at configs....... Then i made a file "START_Xentry.bat" and put in on Desktop @echo off sc start "ConfigAssist Service" cd C:\Program Files (x86)\Mercedes-Benz\Xentry\XD_MB\ start_Xentry.exe passthru PAUSE sc stop "ConfigAssist Service" EXIT And finally i had a Xentry Connect to 2024 Mercedes and DAS Connect to 164/203/211 Notes and finds I have Autel JVCI, MaxiFlash VCI(Newer version), Autel V200 When i used stand alone DAS i was not able to connect I was able to connect via Xentry to 2024 Mercedes (via JVCI/VCI_Newer but NOT V200) Note: Ignition checkbox was present/visible, software dialog prompted to ask if ignition is turn on or off When i used "start_Xentry.exe passthru" I was able to connect ALL MY passthru devices(V200/JVCI/VCI_Newer) via Xentry and DAS Note: No ignition check box was present/visible, software never prompted to turn it on or off since program seen ignition statues WorkAround included(DO NOT USE ConnectorAPI**.reg, try first without it) Open ConfigAssist copy ID, Use Keygen 1.1, Unplug/Disconnect internet when opening Xentry, once it's open and running you can use internet again |
