[autoraedarum]

I get no acess with this settings

   


If choose HO-ICOM/Enet Direktverbindung it works, but i must always confirm the ip and acess manager does not shown

In last version it works with settings from picture

[Bimmer540]

I get no acess with this settings




If choose HO-ICOM/Enet Direktverbindung it works, but i must always confirm the ip and acess manager does not shown

In last version it works with settings from picture

I always choose HO-ICOM / ENET lokales Netzwerk.

[autoraedarum]

I have tryed it also with HO-ICOM / ENET lokales Netzwerk

Is your ISIS Host oder IP`s also empty

[Bimmer540]

I have tryed it also with HO-ICOM / ENET lokales Netzwerk

Is your ISIS Host oder IP`s also empty

Yes.

---

Can you see the icom in Itoolradar. Which firmware has Icom?

[harkes]

Hi everyone

Hope you will bare with me as I have no previous ISTA experience.

I got to here: Check: -> Start ISTA............ and then nothing? Can anybody chime in?

- Thanks, Niels

For some reason, the patched dll doesn't work on your PC. Did ISTA start normally with the original SessionController dll?

Thanks for chiming in. I have the same problem with the original .dll. I'll try on another computer.

[Sabreace]

Maybe someone upload german SQLiteDBs?

Big THX

[hasoon2000]

I keep getting this error. I looked at the config file and did see the line in there. Any ideas?

[hasoon2000]

I ended up fixing the bug. I ran Rcleaner 4.2,4.3,4.4 and restarted my laptop. Ran the reg fix and it did it's job.

I have another issue.

The connection to one of the required databases could not be established. Please check DSS #00046632EN for further trouble shooting

I had a working version previously for ISTA-D. I bought a new laptop and formatted it. I install C++ from 2005 - 2015 x86 and x64. I have Java 8 for x86 and x64. Patched Ediabas 7.3.0. .NET Framework 4.6.1 and 4.6.2.

I'm on Windows 7 Ultimate (same version I was on previously). Installed the Microsoft Primary Interoperabilitiy Assemblies 2005.

Any ideas?

[kerekt]

Install .Net Framework 4.6.2

Hi everyone

Hope you will bare with me as I have no previous ISTA experience.

I got to here: Check: -> Start ISTA............ and then nothing? Can anybody chime in?

- Thanks, Niels

[harkes]

Hi everyone

Hope you will bare with me as I have no previous ISTA experience.

I got to here: Check: -> Start ISTA............ and then nothing? Can anybody chime in?

- Thanks, Niels

For some reason, the patched dll doesn't work on your PC. Did ISTA start normally with the original SessionController dll?

Hi

Ok, so now at least ISTA runs. I ran the x64.reg file and replaced the SessionController.dll. However I get no further than to the License Information page....bla bla bla "send key by email"???