Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Flash e-series CIC to v41 software, BMW Apps without FSC
12-03-2018, 09:42 AM,
Post: #131
|
|||
|
|||
RE: Flash e-series CIC to v41 software, BMW Apps without FSC
Faulty emulator maybe? I have had more than one case where emulator was faulty (codecard.lt emus)
|
|||
12-03-2018, 19:42 PM,
Post: #132
|
|||
|
|||
Flash e-series CIC to v41 software, BMW Apps without FSC
In fact, the reboot happens only once BMW Apps is started -
If I don’t use ConnectedDrive section, no reboot problem. Maybe it’s something similar to EVO HU id4 (2Go RAM) flashed to id5 |
|||
26-03-2018, 17:30 PM,
(This post was last modified: 26-03-2018, 17:43 PM by Pi26.)
Post: #133
|
|||
|
|||
RE: Flash e-series CIC to v41 software, BMW Apps without FSC
(21-12-2017, 16:38 PM)atomantmk Wrote:Hi,(21-12-2017, 00:00 AM)gvitkis Wrote: Hello to allThose files are needed for address 62: @Atomantmk, can you correct your posts 122 & 126, because some are wrong and misslead others: ECU address 62: Data = A9257183.0da (assembly identif number) Program = 9257181A.0pa or 0pb (HW number) NAAB = H020280_0202J6.0ba ECU address A0: Program = 9257185 This is the only one file to flash but 390 Mo so the longest part. For those who are in stuck with the error 211 about 63 area: You can flash (with Icom) using the OBD_625 way in EasyConnect: NAAB takes 1 hour to be done. CiC will reboot and after 20-30 second display the box ''Boot sector Update OK''. Prog Data takes 1/4 hour, the is is shortest part, can be done before Prog Program part. Prog Program is the worst ! 36 hours (4.8 Mo per hour) because this one is 169 Mo ... This way allow to go back, then using Ista/P to have the lastest i-level. |
|||
26-03-2018, 19:18 PM,
Post: #134
|
|||
|
|||
RE: Flash e-series CIC to v41 software, BMW Apps without FSC
(26-03-2018, 17:30 PM)Pi26 Wrote:If you read the first post everything is the same, I have done this twice on E89 without problem and in both cars CIC was dead, stucked in bootloader.(21-12-2017, 16:38 PM)atomantmk Wrote:Hi,(21-12-2017, 00:00 AM)gvitkis Wrote: Hello to allThose files are needed for address 62: Flashing was about 100 minutes with loading files for each address. NBT EVO Apple CarPlay Full Screen, Navigation, Video in Motion, SSH, CP
EntryNav EVO Apple CarPlay, Navigation, CP, SSH, full FSC Pack BMW FSC Retrofit CIC/NBT/EVO 8HP ISN Reset F Series Remote Remote VAG Navigation Update, Apple CarPlay and Android Auto Programming and Coding |
|||
29-03-2018, 08:29 AM,
(This post was last modified: 30-03-2018, 16:12 PM by Pi26.)
Post: #135
|
|||
|
|||
RE: Flash e-series CIC to v41 software, BMW Apps without FSC
atomantmk Wrote:
If you read the first post everything is the same, I have done this twice on E89 without problem and in both cars CIC was dead, stucked in bootloader. Flashing was about 100 minutes with loading files for each address. ---------------------------------------------------------------------------- Can you tell at what step exactly this happened ? and the Program Status number given by iTool32. If like me you were in status 12, try using the ICOM with OBD_625, it runned well with the 63 area, I did it, details above. For other area the sames Ref are given in others forums ... and Gvitkis couldn't find them about area 62 according what you said and aren't what you Uploaded (which are corrects). @+ |
|||
02-06-2018, 17:22 PM,
(This post was last modified: 02-06-2018, 19:39 PM by Clusters.)
Post: #136
|
|||
|
|||
RE: Flash e-series CIC to v41 software, BMW Apps without FSC
Someone knows where the problem is when flashing cic error 211 about 63 area.
Code: #'Sat Jun 02 14:24:31 2018;!5B128C7Fh;V7.3.0;# |
|||
18-09-2018, 19:58 PM,
Post: #137
|
|||
|
|||
RE: Flash e-series CIC to v41 software, BMW Apps without FSC
I can authouritatively confirm that this procedure works for Japan CIC. Did it successfully by selecting correct bootsector file to match japan hardware. Was a long journey but worth the risk.
Therefore Japan CIC can be flashed with Europe/USA ZUSB! |
|||
19-09-2018, 08:40 AM,
(This post was last modified: 13-10-2018, 16:25 PM by 555md.)
Post: #138
|
|||
|
|||
RE: Flash e-series CIC to v41 software, BMW Apps without FSC
Hello everyone , I need help from you,
I retrofitted in my e60 a cic with combox from e89 I want to update cic to v41 because is version C0A Wich daten need to use for e60 or e89? |
|||
01-10-2018, 10:58 AM,
Post: #139
|
|||
|
|||
RE: Flash e-series CIC to v41 software, BMW Apps without FSC
Hi all, my update was wrong and now Cic is dead. Cic showed bootloader in first step (naab prg) and then error came in winkfp.
im using ICom Next step to bring to life please? |
|||
01-10-2018, 15:08 PM,
Post: #140
|
|||
|
|||
RE: Flash e-series CIC to v41 software, BMW Apps without FSC
(01-10-2018, 10:58 AM)skar89 Wrote: Hi all, my update was wrong and now Cic is dead. Cic showed bootloader in first step (naab prg) and then error came in winkfp. Uncheck UIF WRITTEN and everything will be fine NBT EVO Apple CarPlay Full Screen, Navigation, Video in Motion, SSH, CP
EntryNav EVO Apple CarPlay, Navigation, CP, SSH, full FSC Pack BMW FSC Retrofit CIC/NBT/EVO 8HP ISN Reset F Series Remote Remote VAG Navigation Update, Apple CarPlay and Android Auto Programming and Coding |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content