[stecom90]

I will test and give a feedback

[Semi14]

Hello

Is there any way to do it in Entrynav (07/2014)

In entrynav.prg there is no option lesen_provisioning_data is only steuern_provisioning_data

If not, is there any way to switch data transmission to BT and internet in Car??

Greetings

[BMWdriva]

@sacaman 
Will using your instructions display traffic jams rtti?

[polinesiano]

are the 5ёяvїcёs disabled?

[fe7565]

Is this not working anymore thanks to BMW? Even internet via Bluetooth tethering?


I have an retrofit NBT_HU on my F30 (originally CIC_HU). Managed to do all steps by reading the provisioning settings, cleaning up and editing the hex, converting it into xml format, but cannot write it back. This is what I have: ERROR_POSTPROCESSING Could it be because of my nbt.prg file is possibly from 2012? My DPIX is 4.

[Ibrahim24]

Is it the same way to activate real time Traffic information? (RTTI)

[fe7565]

Not sure how to check the date of my NBT.prg. Even if BMW stopped the 5ёяvїcё(s) since the last replies in this thread, Tool32 should still be able to write to the NBT_HU to xml file, just would not work. I used the auto-script to clean up the hex file from "potential errors". That script was posted in this forum and also was demonstrated in the video link on the first page. But I will manually check if it really took out the 0D 0A hex numbers that are considered trash.

[fe7565]

Managed to get rid of the ERROR_POSTPROCESSING and wrote the xml with OKAY.
How?: Replaced the nbt.prog file in the Tool32 folder by taking one from the i5тд+ ECU folder. Most likely a newer version was needed. Will check tomorrow, if internet, etc got enabled.

[Temerecs]

i made a small application for the parssing it's for mac but if needed i will compile it for windows


please be sure that you select the data starting from

PHP Code:

0000 : 3C 3F 78 6D 6C 20 76 65   72 73 69 6F 6E 3D 22 31  <?xml ve  rsion="1 


and you delete all the data after each 4FF0 block

PHP Code:

RET_STATUS                      = 0                    00  .                     
  _REQUEST                        = 12 Bytes
    0000 : 31 01 A0 20 02 06 A0 20   00 01 02 00              1.  ..    ....
  _RESPONSE                       = 31 Bytes
    0000 : 71 01 A0 20 02 00 00 14   00 14 00 10 00 14 00 46  q.  ....  .......F
    0010 : A0 20 00 01 02 00 00 00   00 00 04 FE 0C 00 01       ......  ...þ...
Satz : 2
  RET_LEN                         = 20480             50 00  P.                    
  RET_DATA                        = 20480 Bytes 


this utility will help to get a clean and formated file to be sent to an hexadecimal editor


regards

Please tell me where to find the WIndows version of the program.
Thanks a lot

[Siki78]

i made a small application for the parssing it's for mac but if needed i will compile it for windows


please be sure that you select the data starting from

PHP Code:

0000 : 3C 3F 78 6D 6C 20 76 65   72 73 69 6F 6E 3D 22 31  <?xml ve  rsion="1 


and you delete all the data after each 4FF0 block

PHP Code:

RET_STATUS                      = 0                    00  .                     
  _REQUEST                        = 12 Bytes
    0000 : 31 01 A0 20 02 06 A0 20   00 01 02 00              1.  ..    ....
  _RESPONSE                       = 31 Bytes
    0000 : 71 01 A0 20 02 00 00 14   00 14 00 10 00 14 00 46  q.  ....  .......F
    0010 : A0 20 00 01 02 00 00 00   00 00 04 FE 0C 00 01       ......  ...þ...
Satz : 2
  RET_LEN                         = 20480             50 00  P.                    
  RET_DATA                        = 20480 Bytes 


this utility will help to get a clean and formated file to be sent to an hexadecimal editor


regards

Please tell me where to find the WIndows version of the program.
Thanks a lot

In first post