[ScottDavid]

I've had this problem, you need to reset CBS (condition based service) with INPA, because once your sensor is tripped it sets km remaining on brake pads to -50,000km or something ridiculous. After reseting CBS in INPA you should be able to clear the code and be on your way.

If you are like me and have the wheels off multiple times a year you can tie the sensor away somewhere (not in the caliper) so it will never be set off. Saves you from having to replace the sensor if you're visually checking the pads every few months.

[benoos]

Old theme, but new problem. E90 2005 N52
Friend of mine was "training" with INPA, he hit CBS_reset in DSC module. Now he gots an error on dashboard (replace brake pads) and CBS on yellow.

I wanted to help him. Tool32, DSC_89, cbs_reset Br_v;100
Went OK, but error and CBS still there.

Can I do something else without sensor changing?
Never used function like cbs_korrekturfaktor or cbs_lernewerte_rucksetzen, should I?
It is possible because of another error in DSC? (wheelspeedsensor I guess)

[Sabreace]

Make short circuit in cable to sensor without sensor itself (ignition on)
Turn off Ignition and plug in sensor with cable
Make cbs reset brake pads

For me it works

[benoos]

Yep, it usually works,
but I wonder if there is a way only with some software command...
like yours idea:

there is a last hard Method
cbs_zustand_neufahrzeug ( read the Job Info window if you know what this command do )
click do job once and Pray

Job Info looks like "Push if new pads installed". Why hard method? It works?