Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DCM3.4 eeprom 95640 location
|
28-10-2016, 18:24 PM,
Post: #11
|
|||
|
|||
|
RE: DCM3.4 eeprom 95640 location
Yes mate it contain crc 100%...your car will start but probably with injection fault and wont let you program injectors..
 than you can solve this easy with clip..go to read ecu configuration and than simply write this config back to ecu..yob done and crc is corected.. thats how I solve this and car run right away..
|
|||
| Reputation: +2 - volavka [+2] | |||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
11-04-2019, 20:03 PM,
Post: #12
|
|||
|
|||
|
RE: DCM3.4 eeprom 95640 location
Hi
Old thread... But possible to read that ecu with upa??? |
|||
|
|
|
11-04-2019, 21:25 PM,
Post: #13
|
|||
|
|||
RE: DCM3.4 eeprom 95640 location
(11-04-2019, 20:03 PM)victorysatgr Wrote: Hi Martech Work flawless on this ECU , i did it thousand time But UPA should Work too , just set up VCC table to3.30 volts if i remember well I would like to try again with upa since i have some non working ECU's in Workshop looking forward to your try  Best Regards V BEST CHIPTUNING SERVICE BY Zenter Performance
![[Image: congrats.gif]](https://cartechnology.co.uk/images/smilies/congrats.gif) Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv ![[Image: yes.gif]](https://cartechnology.co.uk/images/smilies/yes.gif) Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
|
|
12-04-2019, 02:40 AM,
(This post was last modified: 12-04-2019, 02:41 AM by victorysatgr.)
Post: #14
|
|||
|
|||
|
RE: DCM3.4 eeprom 95640 location
Unfortunately I don't have martech...
I give a try with upa.... Using this pinout right? |
|||
|
|
|
12-04-2019, 10:14 AM,
(This post was last modified: 12-04-2019, 10:18 AM by victorysatgr.)
Post: #15
|
|||
|
|||
|
RE: DCM3.4 eeprom 95640 location
Hi again...
I read it once with upa (clone) but I didn't get Correct bin.... At the end of the file I have 00 and I should have FF.... I compare it and with other dumps and I see and other mistakes on my file... Now I can't connect at all to read the eeprom.... That have to do with upa?..... |