[Rajco]

F11 03/11 did not work.
xdrive was deactivated but with error messages.
and many FDL values ​​​​that are here I did not have to choose from.

[qbek90]

You can remove error VTG from car by coding and programing,but must changed ABS sensors and drive shaft for front wheels.I done it in F01 750i,but ABS sawed the wrong direction of rotation of the front wheels

[djordan]

That sounds too risky for me...

I have xDelete, maybe I can do some comparisons what they change...

[Ghostly]

For F series actually very easy coding
Icm 203a >> nicht_aktiv
Dsc Variante_Antrieb>>nicht
Funktion_LaengsMomentVerteilung_aktiv>>nicht
And remove fuses for lmv
Works for me just fine, tested on a lot of vehicles, including mine.

[kami2k]

For F series actually very easy coding
Icm 203a >> nicht_aktiv
Dsc Variante_Antrieb>>nicht
Funktion_LaengsMomentVerteilung_aktiv>>nicht
And remove fuses for lmv
Works for me just fine, tested on a lot of vehicles, including mine.

Works also with BMW F10 ATC35l?

[Rajco]

For F series actually very easy coding
Icm 203a >> nicht_aktiv
Dsc Variante_Antrieb>>nicht
Funktion_LaengsMomentVerteilung_aktiv>>nicht
And remove fuses for lmv
Works for me just fine, tested on a lot of vehicles, including mine.

Work also on F11 03/2011 year?

[chr]

Here is an example of the correct way:-

[BDC_BODY]
SWITCHBOARD_AI_B_ENABLE_DTC: nicht_aktiv [00]
SWITCHBOARD_HDC_VARIANT: nicht_vorhanden [00]

[BKOMBI]
ALLRAD: kein_allrad [00]
HDC_VERBAUT: nicht_aktiv [00]

[DSC]
C_AllradAktuator_Schutzfunktion: nicht_aktiv [00]
C_Funktion_CCC_VTG_ekR: nicht_aktiv [00]
C_Funktion_HillDecentControl_aktiv_e: not_active [00]
C_Funktion_LaengsMomentVerteilung_aktiv_e: nicht_aktiv [00]
C_OffroadABS_aktiv: nicht_aktiv [00]
C_Variante_Antrieb_e: Front [00]
C_Variante_Raddrehzahlfuehler_HL_e: ohne_DRE [00]
C_Variante_Raddrehzahlfuehler_HR_e: ohne_DRE [00]
C_Variante_Raddrehzahlfuehler_VL_e: ohne_DRE [00]
C_Variante_Raddrehzahlfuehler_VR_e: ohne_DRE [00]
C_CCC_Efficient_AWD_C: nicht_aktiv [00]
C_Degradation_EDLC_ueber_BDTM_c: keine_Degradation_ueber_BTM [01]
C_HDC_vorhanden: nicht_aktiv [00]
C_Variante_Antrieb: Front [00]
QdmAllradDep: noXNess [00]
QdmAntriebsart: FWD [10]
QdmEkrEff4x4Dep: QdmEkrEff4x4Dep_0 [00]
QdmEvFahrwerk: Nr021 F048 not_PHEV not_X not_M [15]
QdmHangOnTyp: HangOnVA [00]
QdmLenkHardware: FWDF47 [0F]
QdmLenkKinematik: FWDF47 [0F]
QdmMsFahrwerk: Nr039 F048 B47C20 not_PHEV not_X [27]
QdmSbs1qeFaLaengs: Nr016 F048 not_PHEV not_X not_MPA_F039 [10]
QdmSbs1qeFaQuer: Nr021 F048 not_PHEV not_X not_M not_MPA_F039 [15]
QdmZfmQmvFahrwerk: Nr008 F048 not_PHEV not_X not_MPA_F039 [08]

[EGS]
AWD: disable [00]

[HU_ENTRYNAV]
EFF_DYN_TYPE_DRIVETRAIN: front [01]
HDC: nicht_aktiv [00]
ANTRIEB: nicht_aktiv [00]

This codings looks like it disable xdrive, transforming an AWD car into a FWD car.
My feeling is that most people want to disable xdrive in order to have a RWD car.

[donesko]

how do od it on F25 x3, no bdc , I tryed f10 method, got many errors in almost all modules

[SkeYT]

Read my post:

https://cartechnology.co.uk/showthread.p...#pid635988

[st1]

I want permanent all wheel drive instead of xDrive, can this be coded?