[sebbe76]

I installed Ediabas 7.3.0/INPA5.0.6 Fxx support for a client..He also wanted tool dr.gini insta
Have installed the setup in Ediabas

K+Dcan drivers are O.K

INPA up and running..but in dr.gini I get this error

dr.gini config O.K

[Gini]

Hi sebbe76,
you have to make sure the IGNITION is ON
KL30 and KL15 should show a voltage (12 Volts if K+Dcan INTERFACE)

Additional, make sure the status bar shows your Interface and Ediabas version (see attachment)

Remember that Dr.Gini is not supporting older cars (E34, E36, E39, E46, etc...)

[sebbe76]

Thx for superb support

[tortu25]

Hello friends I want to know how to be able to watch a DVD while driving on the highway for passengers with the gini thank you software ( bmw f10).

[Gini]

DVD IN MOTION F Series

- Launch E-sys

- Connect to your car chassis
(er. select F10 simple not F10 DIRECT)

- Read FA

- Right click FA (click activate)

- Click Read SVT and the list of modules will be read and shown.

- Right click on the HU_CIC or HU_NBT module and click "Read Coding Data", expand the newly shown folder and right click on the CAFD file and click "Edit FDL"

- Search for these parameters and change them accordingly:

3000 SPEEDLOCK_X_KMH_MAX Change werte to: FF
3000 SPEEDLOCK_X_KMH_MIN Change werte to: FF
3000 VIDEO_HANDBRAKE set to: nicht_aktiv
3000 VIDEO_FRONT_LOCKED set to: nicht_aktiv
3000 VIDEO_SPEEDLOCK_CONDITION set to: none=00

If you don't have all these parameters, it doesn't matter

[tortu25]

gini hello thank you for your explanations but wonder how a pine tree to find my pin .

[tortu25]

Thank you goodnight I found the pin and operation @ +

[bmw0510]

Hi Gini
I cann't generate a map update code, release code, nothing is there.

[Gini]

Hi bmw0510,
please give me access to your car via TeamViewer. Contact me via PM

[Freddy1]

Since a while I´ve tried to generate a few map FSCs, but somehow they doesn´t work (they did before!), but it does work if I generate it via SWIDReader and FSCGenerator, any ideas Gini?