[siti]

Please help for the code rcd310
nec+95128

1483...............................

[diag55]

Please code to the radio rcd310
1k0035185AA016
vwz1z2k

[ahmad dyb]

Please help me with the reading of full code RCD 500 MP3 CQ-EV1572G3C0 935 195B VWZ5Z7G1111534A Thank you

[Shooting]

Please help me with the reading of full code RCD 500 MP3 CQ-EV1572G3C0 935 195B VWZ5Z7G1111534A Thank you

Post dump for code

wbr

[locarno]

Please help with read original code from this radio. Martech have problems with this unit (Code: 0)

Skoda Octavia Low BVX
SK 1Z0 035 161F
BP-7 648 256 360




In attachment:
-NEC V850
-Ori eeprom
-Eeprom after first try (code: 0000)

[siti]

With pencil is better............0680

[Alnasor]

Please help me with the reading of full code RCD 500 MP3 CQ-EV1572G3C0 935 195B VWZ5Z7G1111534A Thank you

[CAD.123]

Can some please give me the drawings to show me how to read both the eeprom and nec i have alot of radios to do so help is needed thanks

[Shooting]

Can some please give me the drawings to show me how to read both the eeprom and nec i have alot of radios to do so help is needed thanks

READING NEC Processor
===============

Connect the device to your PC through any adapter COM - Rx Tx (MAX232) or USB - Rx Tx (FT232, FT245 and others.).
Solder between the button and the point Masa RESET.
Radio RxD - TxD adapter, data from the PC to the radio.
Radio TxD - RxD adapter, the data from the radio to the PC.
Radio is connected to 12 V, off.
Post 5 V through a resistor 100 Om on the point MODE
(or 12 V via a resistor 12 kOm as shown).
1 sec. press RESET.
Run this program NEC D70F33xx Reader.exe (Download from Post #1), select the desired port number
press INIT, then Read. Save the file and send
along with the 95128 dump.

To switch the radio to normal mode to disable 5V MODE and press the RESET.

[skens]

Hi
please cod
rcd510 bosch VW RADIO MID EU UP3 BVX
8157640206360
3C8035195F
VWZ1Z3L7697515
thx