[BMWF01]

License did not work for me.
The "Weiter" Button is Grayed out.

run ista-d as admin

[Select25]

Thanks but i found a fix afew Sites before
Forgot to use Rcleaner

[draog]

Can not load the 9.45GB Database ... "Error: File to big ...."

Would be kind if someone could give me a hint

[Twoone]

Can not load the 9.45GB Database ... "Error: File to big ...."

Would be kind if someone could give me a hint

Post screenschot of the sqlitedatabase foder. Maybee you did wrong extraction because biggest file is 8.06 GB (OTHER database)

[cryptocar]

Thanks Max!

I finally tested the coding functionality using psdzdata v.58.0.
Successfully upgraded 8 modules using only this build of ISTA, to latest March 2016 i-step level.

Comfort mode programming failed at one point and I had to manually complete several of the procedures from the measures plan, including DME encoding, but this was most likely due to battery voltage falling below 13v, i was using a jump from a running car, but still fell near the end of the execution of the measures plan.

Car runs fine, no issues, only remaining fault is a bogus informational code in the IHKA.

[aboulfad]

Thanks Max!

I finally tested the coding functionality using psdzdata v.58.0.
Successfully upgraded 8 modules using only this build of ISTA, to latest March 2016 i-step level.
...
Car runs fine, no issues, only remaining fault is a bogus informational code in the IHKA.

what's the reason to update to the latest I-step for several modules? Is there a specific feature/improvement you wanted to have, Or just to have the latest?

So from your attempt, it's clear that one definitely needs a PSU w a current rating at least 1.5x the battery amps capacity.

[tinkerman]

I'm catching up after a long break and would appreciate confirmation of whether the following installation procedure is correct

For a complete NEW install of this ISTA-D 3.54.11(with NO previous installation of ISTA-D), onto Win7 x64,

1. Prepare Windows system as described in the following thread's 1st post:
http://cartechnology.co.uk/showthread.php?tid=13812

2. Initiate installation by executing: 'BMW_ISPI_ISTA-APP_3.54.11.15979.msi'
http://cartechnology.co.uk/showthread.php?tid=13546

Correct?

[masa52]

Could someone provide link to the full bases files thanks

[maxtorrld]

I'm catching up after a long break and would appreciate confirmation of whether the following installation procedure is correct

For a complete NEW install of this ISTA-D 3.54.11(with NO previous installation of ISTA-D), onto Win7 x64,

1. Prepare Windows system as described in the following thread's 1st post:
http://cartechnology.co.uk/showthread.php?tid=13812

2. Initiate installation by executing: 'BMW_ISPI_ISTA-APP_3.54.11.15979.msi'
http://cartechnology.co.uk/showthread.php?tid=13546

Correct?

2nd step not needed (read [Rheingold :] section)...

[MCNEXO94]

Hello i'am found language French you have ?