Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW E39 EWS Prob.Coding,please Help
12-04-2016, 16:23 PM,
Post: #1
|
|||
|
|||
![]()
Hello,
sorry Gys but I hope somebody here can Help me...thanks in advance!!! I have a Problem with my E39 Bmw Year 2000 Its starts in Dezember last year with Car want start and want crank at all.In Inpa I could read error about Change Code for the Key is wrong or Key not recognized or wrong Key password. I by a new Key and Ringantena but the Problem stays. The Car starts for 3 or 4 days and after that the same with the new Key and ringantena. Wen I disconest the conector of the EWS for a wile to make a Power on Reset the Car runs again for a 3 or 4 days and than again the same.It must be some prob with the change code in EWS I think. Now I by a Used EWS3 and make it Virgin so I need some Help to cod it to my Car to Work with it. I make a Backup of Original EWS and put it in the used one with BMW Scanner 1.4. But how I need to put the Key Codes for my Key to work with it. Do I need to code it again or Can I just put the Fixed Code of the Key as shown in the picture.How do I find the Password I need to write in the EWS? Do I need to Lock EWS after all is done? I would realy be Thankful if someone could help me here ![]() Thanks in Advance! |
|||
12-04-2016, 17:48 PM,
(This post was last modified: 12-04-2016, 17:49 PM by hamzettin.)
Post: #2
|
|||
|
|||
RE: BMW E39 EWS Prob.Coding,please Help
Hello,
buy yourself tool and can teach this every ews and also used . EWS 3 can BMW Scanner not only unlock EWS 2 , if you want to apply ews 2 , then you need to make and harness change on static . regards Sorry Link... http://www.diagtools.de/wholesale/ews-ed...r-bmw.html |
|||
12-04-2016, 18:00 PM,
Post: #3
|
|||
|
|||
RE: BMW E39 EWS Prob.Coding,please Help
Sory Hamzetin but I have everything I need ,I just need to know how to put the Key codes in the EWS with BMW Scanner,it works with this hardware to.
|
|||
12-04-2016, 18:24 PM,
Post: #4
|
|||
|
|||
RE: BMW E39 EWS Prob.Coding,please Help
Hello,
you have any connect a ews and read with inpa the current key and then enter . You can also use blanks or take a used ews and your copy and transfer in hand . regards |
|||
12-04-2016, 22:35 PM,
Post: #5
|
|||
|
|||
RE: BMW E39 EWS Prob.Coding,please Help
You need ews editor
|
|||
13-04-2016, 19:39 PM,
Post: #6
|
|||
|
|||
RE: BMW E39 EWS Prob.Coding,please Help
(12-04-2016, 17:48 PM)hamzettin Wrote: Hello,Don't post links in open text on forum Read rules If any of my posts or current one helps then don't forget to press thanks and add a reputation
![]() |
|||
15-04-2016, 17:37 PM,
Post: #7
|
|||
|
|||
RE: BMW E39 EWS Prob.Coding,please Help
Thanks for your Replays,today I order EWS Editor
as soon as I get it I will try to code my EWS. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
4 Guest(s)
4 Guest(s)
Return to TopReturn to Content