Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Can not read EDC17C46 with Ktag
|
26-04-2016, 13:03 PM,
Post: #1
|
|||
|
|||
|
Can not read EDC17C46 with Ktag
Hi
I tried read ecu from vw sharan edc17c46 with fgtech and not succesfully, after I tried ktag and also can not read... pleas look on my pictures connection that is correct.. thank you |
|||
|
|
26-04-2016, 14:20 PM,
Post: #2
|
|||
|
|||
|
RE: Can not read EDC17C46 with Ktag
Protocol edc17c46
|
|||
|
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
2 users say Thank You to deeldragan for this post |
|
26-04-2016, 14:50 PM,
Post: #3
|
|||
|
|||
|
RE: Can not read EDC17C46 with Ktag
If you have a clone FGtech Galleto not read the ECU
New Trasdata Pin 68 - CAN H white cable Pin 67 - CAN L green Pin 2 -GND black Pin 6 and 87 -12 V red POL 4 Boot grey POL5 CNF1 blue Or BDM connection |
|||
|
|
|
26-04-2016, 15:04 PM,
Post: #4
|
|||
|
|||
|
RE: Can not read EDC17C46 with Ktag
Use protocol 199!
|
|||
|
|
|
26-04-2016, 15:39 PM,
Post: #5
|
|||
|
|||
|
RE: Can not read EDC17C46 with Ktag
Ths I think that connection is gook, I test ecu in car and it is OK. Ktag is maybe bad, I connect voltmetr to gnd and power wires and DC pulse up tu 12V and down to 0 V ..
|
|||
|
|
|
26-04-2016, 15:53 PM,
Post: #6
|
|||
|
|||
|
RE: Can not read EDC17C46 with Ktag
Are you sure the wiring is ok in the adapter?
some need reworking also is ktag reworked? if my post helps please give Reputation
 and Thanks |
|||
|
|
|
26-04-2016, 16:04 PM,
Post: #7
|
|||
|
|||
|
RE: Can not read EDC17C46 with Ktag
For this tipe of ecu you need a better power source.
I had the same problem with PCR2.1. Take a 12v 2 amps psu, and then the voltage will stay. |
|||
|
|
|
26-04-2016, 17:54 PM,
Post: #8
|
|||
|
|||
|
RE: Can not read EDC17C46 with Ktag
|
|||
|
|
|
26-04-2016, 18:00 PM,
Post: #9
|
|||
|
|||
|
RE: Can not read EDC17C46 with Ktag
You need to change all capacitors, some transistors ( allot), and the murata filters.
Post a picture High resolution, and we will tell you what you need to change. |
|||
|
|
|
26-04-2016, 18:25 PM,
Post: #10
|
|||
|
|||
|
RE: Can not read EDC17C46 with Ktag
Select P199 in ktag menu, there is bug for edc17c46 in ksuite
|
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
|
Need Stage 1 Audi Q5 EDC17c46 1037526381 1037558558 | danny677 | 3 | 81 |
14-04-2024, 16:20 PM Last Post: danny677 |
|
EDC17C46 PASSAT STAGE1 | rasmoka | 2 | 109 |
04-04-2024, 12:16 PM Last Post: rasmoka |
| How to read ME 3.1.1 | stjansdal | 2 | 85 |
01-04-2024, 11:54 AM Last Post: stjansdal |
|
| [Request] Ksuite 2.23 for reworked Kess and KTAG | Jordiano | 0 | 90 |
30-03-2024, 10:17 AM Last Post: Jordiano |
|
| Edc17c46 Audi A6 EGR issue | youberser | 5 | 200 |
19-03-2024, 22:10 PM Last Post: youberser |
|
|
|
ME7.1.1 8E0910560J full read needed | Andreis | 0 | 60 |
18-03-2024, 19:40 PM Last Post: Andreis |
|
need full bdm ktag bmw e87 118d | saninpwnzor | 2 | 103 |
14-03-2024, 18:05 PM Last Post: saninpwnzor |
| edc17c46 what are these maps? | Rakuzo | 6 | 207 |
12-03-2024, 18:03 PM Last Post: DavidT |
|
|
|
1.8T AUM Bora Stage 1 read out and flash? | Speedy_07 | 3 | 126 |
11-03-2024, 09:52 AM Last Post: Elijah |
| Ktag 7020 firmware+SD free - update solved | ovi730 | 38 | 16,218 |
07-03-2024, 13:38 PM Last Post: vLTy |
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
