Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Can not read EDC17C46 with Ktag
26-04-2016, 19:44 PM,
Post: #11
RE: Can not read EDC17C46 with Ktag
I use Trasdata.
It is working verry good.
So. maibe @ Parik is right.
Quote this message in a reply
26-04-2016, 20:04 PM,
Post: #12
RE: Can not read EDC17C46 with Ktag
(26-04-2016, 18:00 PM)dorofteius Wrote:  You need to change all capacitors, some transistors ( allot), and the murata filters.
Post a picture High resolution, and we will tell you what you need to change.

Here is some pictures


Attached Files Thumbnail(s)
           
Quote this message in a reply
26-04-2016, 20:11 PM,
Post: #13
RE: Can not read EDC17C46 with Ktag
It is a good clone. It is already reworked. So no need to blaim the hardware.
Quote this message in a reply
[+] 2 users say Thank You to dorofteius for this post
26-04-2016, 20:18 PM,
Post: #14
RE: Can not read EDC17C46 with Ktag
(26-04-2016, 20:11 PM)dorofteius Wrote:  It is a good clone. It is already reworked. So no need to blaim the hardware.

Thanks.. I read it again with P199 and succesfully but with error about checksum
Quote this message in a reply
26-04-2016, 22:05 PM,
Post: #15
RE: Can not read EDC17C46 with Ktag
Install ksuite 2.15, you need newer windows dlls, then can use odler 2.08 or 2.11 but without installation.
Quote this message in a reply
[+] 2 users say Thank You to parik for this post
14-05-2016, 06:57 AM,
Post: #16
RE: Can not read EDC17C46 with Ktag
Change power suply try 14.1 v
Quote this message in a reply
14-05-2016, 07:02 AM,
Post: #17
RE: Can not read EDC17C46 with Ktag
You can try with trasdata software
Quote this message in a reply
16-05-2016, 12:35 PM,
Post: #18
RE: Can not read EDC17C46 with Ktag
(14-05-2016, 07:02 AM)cawadany Wrote:  You can try with trasdata software

where find working trash data software ?
Quote this message in a reply
11-12-2018, 10:13 AM,
Post: #19
RE: Can not read EDC17C46 with Ktag
hi friend

i have same trouble with original ktag LOL
Quote this message in a reply
15-03-2019, 19:58 PM,
Post: #20
RE: Can not read EDC17C46 with Ktag
Hi There, yes its true higher voltage supply up to 16 volts , the tricore processor needs a bit more power when reading. Try it .it works
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Edc17c46 Audi A6 EGR issue youberser 5 178 19-03-2024, 22:10 PM
Last Post: youberser
ZTAudi ME7.1.1 8E0910560J full read needed Andreis 0 46 18-03-2024, 19:40 PM
Last Post: Andreis
XZBMW need full bdm ktag bmw e87 118d saninpwnzor 2 82 14-03-2024, 18:05 PM
Last Post: saninpwnzor
  edc17c46 what are these maps? Rakuzo 6 168 12-03-2024, 18:03 PM
Last Post: DavidT
ZVW 1.8T AUM Bora Stage 1 read out and flash? Speedy_07 3 99 11-03-2024, 09:52 AM
Last Post: Elijah
  Ktag 7020 firmware+SD free - update solved ovi730 38 15,959 07-03-2024, 13:38 PM
Last Post: vLTy
  ECU read write lock gvitkis 2 581 05-03-2024, 20:24 PM
Last Post: robertop
JFiat FIAT EDC16C39 read/write isamyku 1 99 29-02-2024, 15:43 PM
Last Post: bogdanwmw
  Need full read Johnson Controls S3000 Renault Megane 2.0 RS 8200509965 Maikiu 2 93 28-02-2024, 21:14 PM
Last Post: martink550
UInfiniti Nissan X-Trail 2.2 136hp 2006 How to read/write this ECU beg1 3 141 28-02-2024, 13:03 PM
Last Post: dimitar

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content