[okolo]

I, tell me where dnwload and use...and i will use immediatly

use immediatly



http://cartechnology.co.uk/showthread.php?tid=9478

[bacchiluca]

Thanks.
Done, but i see Always data trimmed like image attached below....

[SweetBMW]

Http://cartechnology.co.uk/showthread.ph...478&page=3

---

I use it and my cafd are fine. 3.58.3,003 psdzdata loaded

[bacchiluca]

Hello, your link go to a page with no link di download.
Can you explain how add description for editing ?
Thanks

[SweetBMW]

Look in first page

[Almaretto]

Hello, i installed all file ..but Always same problems: Launcher ask a token ! To obtain token, send a mail to Tokenmaster...that never reply to mail ...so it's is impossibile to code... anyone has a solution to obtain token ?

TokenMaster's Premium Launcher is self-contained and will generate token on first launch. See the following video. Unless you are in certain regions (Italy, China, Russia), then need to wait for TokenMaster to respond for activation code.

Why not use esys plus?

I am still playing around with it, but I cannot seem to get it to read some of the newest CAFDs. My cars are at ISTA-P 3.58.3. Launcher Premium does work.

I, tell me where dnwload and use...and i will use immediatly

See post #7 above.

[AutoExe3219]

Thanks.
Done, but i see Always data trimmed like image attached below....

are you go to "setings" to set .EST?

[Almaretto]

Hello, your link go to a page with no link di download.
Can you explain how add description for editing ?
Thanks

For TokenMaster's Launcher solution, you will have only dots and no descriptions (ie trimmed data) if either a) you chose incorrect chassis in the launcher or b) the ECU/CAFD is so new that it is not currently mapped (eg, some G-series like CAFD_000017BC).

You can always use TokenMaster's NCD / CAFD Tool to open any *.ncd to see data. If you can read in Tool but not in E-sys, then incorrect chassis was chosen.