Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA-D 3.56.21.16873 Standalone
02-07-2016, 15:21 PM,
Post: #11
|
|||
|
|||
RE: ISTA-D 3.56.21.16873 Standalone
Your first ISTA installation?
Microsoft visual studio x86 und x64 installded? |
|||
02-07-2016, 16:12 PM,
Post: #12
|
|||
|
|||
RE: ISTA-D 3.56.21.16873 Standalone
You need 3.56.14 database, because 3.56.21 database doesn't exist
|
|||
02-07-2016, 16:28 PM,
Post: #13
|
|||
|
|||
RE: ISTA-D 3.56.21.16873 Standalone
|
|||
03-07-2016, 02:04 AM,
Post: #14
|
|||
|
|||
RE: ISTA-D 3.56.21.16873 Standalone
From my experience Standalone version never work properly ( does not see sometimes in some cars damaged moduls )
the same applies to the installation of IDSS sees everything green in the tree diagnosis Only version of Ista + installed full installation works professionally and well |
|||
03-07-2016, 04:48 AM,
Post: #15
|
|||
|
|||
RE: ISTA-D 3.56.21.16873 Standalone
(03-07-2016, 02:04 AM)IM6 Wrote: From my experience Standalone version never work properly ( does not see sometimes in some cars damaged moduls ) I'm not so sure about that...I've had unresponsive modules before that Ista-d showed as not functioning(red in the module tree) and then those modules were replaced and all was well (green in module tree). Have always used ista-d standalone. |
|||
03-07-2016, 11:48 AM,
(This post was last modified: 03-07-2016, 12:31 PM by brutten87.)
Post: #16
|
|||
|
|||
RE: ISTA-D 3.56.21.16873 Standalone
(02-07-2016, 15:21 PM)Jake Wrote: Your first ISTA installation? Oh no. First I had ista d 3.50 Installed. Then I used the base files 3.56.14 and swapt the ISTA map. SQLiteDB's data file from this forum and dutch,EN and other from my work. I can't get the data file from work. It will not give me the option to choose my connection. @ work we only work whit the OEM Icom's. There are a few differences. So I tough, I will swap ISTA map with the 3.56.21 basefiles. Just do the same as I upgraded my 3.50 tot 3.56.14. Tryed it again. This is the error. |
|||
03-07-2016, 16:09 PM,
Post: #17
|
|||
|
|||
RE: ISTA-D 3.56.21.16873 Standalone
|
|||
03-07-2016, 17:18 PM,
Post: #18
|
|||
|
|||
RE: ISTA-D 3.56.21.16873 Standalone
Yes beemerboy. That's why I get errors. The data file's don't match.
The only file I need is the DiagDocDb.sqlite file version 3.56.20/21 The language files can I copy from work and upload it if someone is intrested. The DiagDocDb.sqlite is different, I think BMW modify this file so you cannot setup a d of k-can connection + there are other little differents. |
|||
03-07-2016, 18:32 PM,
Post: #19
|
|||
|
|||
RE: ISTA-D 3.56.21.16873 Standalone
(03-07-2016, 17:18 PM)brutten87 Wrote: Yes beemerboy. That's why I get errors. The data file's don't match. Hello! I am interested in language databases, especially the NL. Thank you in advance. |
|||
03-07-2016, 20:36 PM,
Post: #20
|
|||
|
|||
RE: ISTA-D 3.56.21.16873 Standalone
(03-07-2016, 17:18 PM)brutten87 Wrote: Yes beemerboy. That's why I get errors. The data file's don't match. DiagDocDb.sqlite, _OTHer, AND _ENGB would be appreciated if you can get. Thanks. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content