[Diagnostix]

Doesn't look like it's a valid key

It is from the only KG I have for EPC with datacard. And it was with every option included, 2020 and 2 users. Your mac is presumably correct or first keys would not have worked. Sorry mate. Someone will get it right in the end, for sure.

---

One more try.

8f433dvml2zdhl589225lnyul6y3wns

---

Or...

the other thing you can do is, on ewa net access the user profiles page and change the settings for the data card accessibility.

Try this. To me it worked.

Open with your Notepad the wis_cfg.xml file from your EWA-NET Folder\Config &
search the word: "datacardurl" replace the lan ip address with "localhost" in the
2x points that you watching:

<PARAMETER name="datacardUrl">http://127.0.0.1:9000/EPC-net/datacardapi</PARAMETER>
<!-- URL of datacard service for Snap On's datacard view: -->
<PARAMETER name="datacard_V2_Url">http://127.0.0.1:9000/EPC-net/dcapi</PARAMETER>

Save your .xml file and Reboot your PC!

[sickfinga]

Doesn't look like it's a valid key

It is from the only KG I have for EPC with datacard. And it was with every option included, 2020 and 2 users. Your mac is presumably correct or first keys would not have worked. Sorry mate. Someone will get it right in the end, for sure.

---

One more try.

8f433dvml2zdhl589225lnyul6y3wns

---

Or...

the other thing you can do is, on ewa net access the user profiles page and change the settings for the data card accessibility.

Try this. To me it worked.

Open with your Notepad the wis_cfg.xml file from your EWA-NET Folder\Config &
search the word: "datacardurl" replace the lan ip address with "localhost" in the
2x points that you watching:

<PARAMETER name="datacardUrl">http://127.0.0.1:9000/EPC-net/datacardapi</PARAMETER>
<!-- URL of datacard service for Snap On's datacard view: -->
<PARAMETER name="datacard_V2_Url">http://127.0.0.1:9000/EPC-net/dcapi</PARAMETER>

Save your .xml file and Reboot your PC!

Still no luck, I don't think the URL is the issue since it tells me I got no rights to view datacards.

[camaro]

Doesn't look like it's a valid key

It is from the only KG I have for EPC with datacard. And it was with every option included, 2020 and 2 users. Your mac is presumably correct or first keys would not have worked. Sorry mate. Someone will get it right in the end, for sure.

---

One more try.

8f433dvml2zdhl589225lnyul6y3wns

---

Or...

the other thing you can do is, on ewa net access the user profiles page and change the settings for the data card accessibility.

Try this. To me it worked.

Open with your Notepad the wis_cfg.xml file from your EWA-NET Folder\Config &
search the word: "datacardurl" replace the lan ip address with "localhost" in the
2x points that you watching:

<PARAMETER name="datacardUrl">http://127.0.0.1:9000/EPC-net/datacardapi</PARAMETER>
<!-- URL of datacard service for Snap On's datacard view: -->
<PARAMETER name="datacard_V2_Url">http://127.0.0.1:9000/EPC-net/dcapi</PARAMETER>

Save your .xml file and Reboot your PC!

Still no luck, I don't think the URL is the issue since it tells me I got no rights to view datacards.

Hi, If you look at the picture that your bit string is wrong, try and edit the bitstring so it is similar to that in (EWA Admin Tool) and see if it will work then. or just change the bit number 23, which is 1 to 0

[sickfinga]

Doesn't look like it's a valid key

It is from the only KG I have for EPC with datacard. And it was with every option included, 2020 and 2 users. Your mac is presumably correct or first keys would not have worked. Sorry mate. Someone will get it right in the end, for sure.

---

One more try.

8f433dvml2zdhl589225lnyul6y3wns

---

Or...

the other thing you can do is, on ewa net access the user profiles page and change the settings for the data card accessibility.

Try this. To me it worked.

Open with your Notepad the wis_cfg.xml file from your EWA-NET Folder\Config &
search the word: "datacardurl" replace the lan ip address with "localhost" in the
2x points that you watching:

<PARAMETER name="datacardUrl">http://127.0.0.1:9000/EPC-net/datacardapi</PARAMETER>
<!-- URL of datacard service for Snap On's datacard view: -->
<PARAMETER name="datacard_V2_Url">http://127.0.0.1:9000/EPC-net/dcapi</PARAMETER>

Save your .xml file and Reboot your PC!

Still no luck, I don't think the URL is the issue since it tells me I got no rights to view datacards.

Hi, If you look at the picture that your bit string is wrong, try and edit the bitstring so it is similar to that in (EWA Admin Tool) and see if it will work then. or just change the bit number 23, which is 1 to 0

When I click on the Update button, the check mark disappears, but it won't let me save. It reverts back to checked

[art_arev]

Sickfinga, the keys given to you are all correct. Datacard is enabled. You must have some settings wrong. Is the access authorisation set to workshop?

[sickfinga]

Sickfinga, the keys given to you are all correct. Datacard is enabled. You must have some settings wrong. Is the access authorisation set to workshop?

It's set to Limited access authorization. If I set it to Workshop, all check marks are read only.

[forumtmp]

Hi,
please keys for EPC and WIS: 28D244792EAE
Thanks

[mfojtu1]

Hi All,
I need keygen for EPC a WIS. My MAC address : 080027E625EB.
Many thanks.
Michal

[Diagnostix]

Hi All,
I need keygen for EPC a WIS. My MAC address : 080027E625EB.
Many thanks.
Michal

Here try these...

EPCnet: RACSJK4KSQ3PN5G6G36878ZCX89LDSZK2SB878V7Q6CVGJ3N
WISnet: NW6VM54QYUXSNENBU7VERVLT4Y27DUZD3HZ7DSTHGA73G77Q

[art_arev]

Sickfinga, the keys given to you are all correct. Datacard is enabled. You must have some settings wrong. Is the access authorisation set to workshop?

It's set to Limited access authorization. If I set it to Workshop, all check marks are read only.

Use this EPC key & change access authorisation to workshop.
gjwww6czxc25rxtpae7e9kppyek2z62
Reboot the comp & try.