[volavka]

Hi ppl
i need immo off for Peugeot 307 engine 1.4 hdi with ecu edc16c3

attached ori eeprom 95160

Thanks advanced

[bouizanne]

Hi friend try this

[volavka]

Hi friend try this

not work .. car run max 3000 rpm

thanks

[bouizanne]

Ok but it start ? make save of your parameter , injector code .... , i make an other normaly no limit to 3000 wait

---

try this friend

[MARTINS AUTOMECH]

Hi friend try this

not work .. car run max 3000 rpm

thanks

i thinks by immo off the rev limit is set at 3000rpm by default, but u can probly correct it with diagbox or pp2000,go to ecu configuration check and set the rev limit to be =0, to disable rev limit

[ROD-BENDERS]

Hi ppl
i need immo off for Peugeot 307 engine 1.4 hdi with ecu edc16c3

attached ori eeprom 95160

Thanks advanced

Immo is off Volavka, but interesting thing is all injector coding is FFFFFFFF

If you have injector codes I can write them in



Checksums ok

[volavka]

Thanks buzzard m8
injector Codes not enough clear
if u can find from old ecu dump will be much beter
attached ori dump from 95160

injector maybe
F1CE 9D40
FBF8 81CD
FE0F 5B40
FA1F 4080

thanks

[megabase]

Hi try this file

[ROD-BENDERS]

Thanks buzzard m8
injector Codes not enough clear
if u can find from old ecu dump will be much beter
attached ori dump from 95160

injector maybe
F1CE 9D40
FBF8 81CD
FE0F 5B40
FA1F 4080

thanks

No good to me this time Volavka, my soft finds injectors as FFFFF on old bin too. Ive done loads of these and usually injector codes come up but not in this case. I have tried to put in place your numbers, see how it goes, you may have to code when the car is running.

Best I can do matey

[cport]

Volavka pass in PM.

100% work.