[Almaretto]

But which directory? on the desktop or C:

Does not matter. I have installed from external drive as well as desktop before. The important thing is to have unmodified installation (eg, cannot launch in expert mode) and the two files just must be placed together.

[arcelik]

Ok. Its enough if i Install the 3.59.0.600 for update ileven on F30?

[Almaretto]

Ok. Its enough if i Install the 3.59.0.600 for update ileven on F30?

I have no idea what integration step is on your F30. ISTA-P contains Psdzdata_Full of particular version. If your F030 is F020-16-03-504 or earlier, 3.59.0.600 would update your vehicle. However, 3.59.3.002 is the latest and it would update even more. Are you updating for a particular reason?

[arcelik]

Yes. I changed the FEM Modul and now i must coding, but with the old ISTA-P was not possible. And now my Car dont start because i can't install the ISTA-P. Its a German Software and i am from Germany but u can't find anything on the German Site..thats soo terrible

---

or i must try it with esys because i have already the actually psdzdata

[Almaretto]

Yes. I changed the FEM Modul and now i must coding, but with the old ISTA-P was not possible. And now my Car dont start because i can't install the ISTA-P. Its a German Software and i am from Germany but u can't find anything on the German Site..thats soo terrible

---

or i must try it with esys because i have already the actually psdzdata

Flashing works with both ISTA-P and E-sys.
I uploaded entire ISTA-P v3.59.3.002 folder, minus the Psdzdata_full, if you want to just download that.

[arcelik]

I download already 3.59.3.002 but at the first i must download all the old version for install

[Almaretto]

I download already 3.59.3.002 but at the first i must download all the old version for install

Yes. If you want native install, rather than extracting and running, you must download all the *.exe's and *.istap for the last major version (ie 3.59.0.600, 40+GB) as well as incremental updates (~500MB each).

[SCOTT]

Depending how old the vehicle is

http://cartechnology.co.uk/showthread.php?tid=15589

Just download 3.59.0.600 istap and tools folder , extract ista-p to your computer

install from tools folder netframework and vcredist files, vc90.iparedist, Patched_EDIABAS_7.3.0

put loader 4.9 on desktop and run it .

that way you skip possible errors that you see associated with installing it .

[spider80]

Depending how old the vehicle is

http://cartechnology.co.uk/showthread.php?tid=15589

Just download 3.59.0.600 istap and tools folder , extract ista-p to your computer

install from tools folder netframework and vcredist files, vc90.iparedist, Patched_EDIABAS_7.3.0

put loader 4.9 on desktop and run it .

that way you skip possible errors that you see associated with installing it .

For 3.59.0.600 wrong link.
True link is: http://cartechnology.co.uk/showthread.php?tid=16435

[bmw335coding]

Update for my installation fail;

I do following steps:
- modifyed files (voltage constant.dll) replaced
- .net Framework complete deinstall, registry cleaning
- restart
- load the newest .net Framework 4.6.2, install without problems
- restart
- disable AntiVir, close all ISTA-P processes
- reset ISTA-P settings
- install
...

and it FAILS.

I never see a so bad installer, everytime problems with ISTA-P installations.
When it success, then a 5MB installer package loads 4 hours with an i7, 8gb, ssd...
No words.

For me;
I wait for new big ISTA-P release, then i deinstall all and install new.