Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA 4.01.21 Standalone - Mega
07-09-2016, 07:54 AM,
Post: #21
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(07-09-2016, 07:20 AM)delete Wrote:(06-09-2016, 23:10 PM)hulahans Wrote: The main psdzdata folder extracted from BMW_ISPI_ISTA-SDP_FULL_4.01.15 is to small with 37.8gb It needs to be installed using the launcher. Should be 62GB. |
|||
07-09-2016, 07:59 AM,
Post: #22
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(07-09-2016, 07:54 AM)beemerboy88 Wrote:May I ask you to explain how the launcher works in case we have a valid license ?(07-09-2016, 07:20 AM)delete Wrote:(06-09-2016, 23:10 PM)hulahans Wrote: The main psdzdata folder extracted from BMW_ISPI_ISTA-SDP_FULL_4.01.15 is to small with 37.8gb Just need to put all files in sharedfolder and start launcher ? what are the prerequisite ? Thank you |
|||
07-09-2016, 08:44 AM,
Post: #23
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
Hi Thanks, But your link doesnt work
|
|||
07-09-2016, 12:15 PM,
(This post was last modified: 07-09-2016, 12:35 PM by hulahans.)
Post: #24
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(07-09-2016, 05:29 AM)Select25 Wrote:(07-09-2016, 00:59 AM)hulahans Wrote: Standalone diagnosis works quite good, but i can not make measurement Plan. I have tested now again with icom next, diagnosis works but programming same result as with eth. I have to test the car first, although i did that several times. Someone have another idea? |
|||
07-09-2016, 13:02 PM,
(This post was last modified: 07-09-2016, 13:03 PM by aboulfad.)
Post: #25
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(07-09-2016, 12:15 PM)hulahans Wrote: I have tested now again with icom next, diagnosis works but programming same result as with eth. I have to test the car first, although i did that several times.Sorry this won't help, but I recall you, I and others had this same issue back in Jan/Feb this year using 3.54 ... I gave up on programming using ISTA/D and exclusively use Esys. http://cartechnology.co.uk/showthread.ph...734&page=5 One conclusion is that a physical ICOM is needed, not emulator and doesn't work with ENET but you seem to be back to square 0 even with ICOM! |
|||
07-09-2016, 13:17 PM,
Post: #26
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(07-09-2016, 12:15 PM)hulahans Wrote:(07-09-2016, 05:29 AM)Select25 Wrote:(07-09-2016, 00:59 AM)hulahans Wrote: Standalone diagnosis works quite good, but i can not make measurement Plan. psdzdata in ista 4.01.21 is 62GB vs 60GB for ISTA/P. But probably not the cause of the problems you are having. |
|||
07-09-2016, 13:43 PM,
Post: #27
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(07-09-2016, 13:17 PM)beemerboy88 Wrote:(07-09-2016, 12:15 PM)hulahans Wrote:(07-09-2016, 05:29 AM)Select25 Wrote:(07-09-2016, 00:59 AM)hulahans Wrote: Standalone diagnosis works quite good, but i can not make measurement Plan. What files do I need and what location must I place that files for programming with Ista 4. |
|||
07-09-2016, 13:48 PM,
(This post was last modified: 07-09-2016, 14:21 PM by hulahans.)
Post: #28
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
Path in istagui exe config was wrong
<!-- Enable Programming --> <add key="BMW.Rheingold.Programming.Enabled" value="true" /> <add key="BMW.Rheingold.Programming.ExpertMode" value="true" /> <add key="BMW.Rheingold.Programming.PsdzDataPath" value="c:\esysdata\psdzdata"/> But don t think that it will solve my problem So, i got it, changed the path with different settings and now programming /measurement plan works My psdzdata 59.4 folder i copied to C:\Rheingold\PSdZ\data and i changed istagui path to this <!-- Enable Programming --> <add key="BMW.Rheingold.Programming.Enabled" value="true" /> <add key="BMW.Rheingold.Programming.ExpertMode" value="true" /> <add key="BMW.Rheingold.Programming.PsdzDataPath" value="c:\Rheingold\PSdZ\data"/> |
|||
Reputation: +2 - M-Simon [+1] , jaramillo [+1] | |||
07-09-2016, 14:23 PM,
Post: #29
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(07-09-2016, 07:20 AM)delete Wrote:(06-09-2016, 23:10 PM)hulahans Wrote: The main psdzdata folder extracted from BMW_ISPI_ISTA-SDP_FULL_4.01.15 is to small with 37.8gb Yes, the ISTA-D data only contains BN2020 vehicle data (F, G, I, newer RR) which is why it's smaller. It doesn't contain any E series data. ISTA-P will contain all chassis data until around August 2017, then BMW plans to phase out all BN2020 vehicle data in ISTA-P. So ISTA-P will be E-series only and ISTA 4 will be everything else. |
|||
07-09-2016, 14:33 PM,
Post: #30
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
How to use this program
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content