Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA 4.01.21 Standalone - Mega
07-09-2016, 14:40 PM,
Post: #31
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(07-09-2016, 13:48 PM)hulahans Wrote: Path in istagui exe config was wrong Don't think that is the official way but if it works then all good. Do you have service data now listed? |
|||
07-09-2016, 14:45 PM,
Post: #32
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
|
|||
07-09-2016, 14:56 PM,
Post: #33
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
I believe you must have the programming data from the SDP, it's different to the ISTA-P programming data.
|
|||
07-09-2016, 15:24 PM,
Post: #34
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
|
|||
07-09-2016, 15:26 PM,
Post: #35
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
Yes with icom next, but will test with eth too
|
|||
07-09-2016, 15:29 PM,
Post: #36
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(07-09-2016, 15:26 PM)hulahans Wrote: Yes with icom next, but will test with eth tooOh if that works that would be cool just for the fact that it works and I spent countless days earlier this year to no avail... it's also good news that for those of us with newer BMW platforms, psdZs are smaller thanks to your observation and dracon's reply! |
|||
07-09-2016, 16:10 PM,
Post: #37
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(07-09-2016, 05:29 AM)Select25 Wrote:(07-09-2016, 00:59 AM)hulahans Wrote: Standalone diagnosis works quite good, but i can not make measurement Plan. (07-09-2016, 15:29 PM)aboulfad Wrote:(07-09-2016, 15:26 PM)hulahans Wrote: Yes with icom next, but will test with eth tooOh if that works that would be cool just for the fact that it works and I spent countless days earlier this year to no avail... it's also good news that for those of us with newer BMW platforms, psdZs are smaller thanks to your observation and dracon's reply! Tested it again,ETH still don t work for programming and measurement plan . I hope that with icom the most ECUs (NBT,Kombi) are possible to flash without router or dhcpsrv like ista p. Will test the next days |
|||
07-09-2016, 16:34 PM,
Post: #38
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
I am working on a Launcher based solution to extract the programming data from the SDP packages.
Email: [email protected] Skype: [email protected]
HU Engineering Tool MGU Engineering Tool - now with field update mode via Feature Installer. Coding 2.0 |
|||
Reputation: +8 - Bimmer540 [+1] , M-Simon [+1] , 530d [+1] , jaramillo [+1] , simonchs [+1] , cryptocar [+1] , jogi8850 [+1] , Gmmdi911 [+1] | |||
07-09-2016, 18:32 PM,
Post: #39
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
If you open the SDP Full 4.01.15 package with 7zip and take a look inside the FullInstallationDescription.xml, you can see that the data packages from this content are copied to the psdzdata folder (take a look at the file source and targets.) In the Delta file the procedure replace only some files. All files are checked with checksum to verify that the data integrity is valid.
|
|||
07-09-2016, 23:37 PM,
Post: #40
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(07-09-2016, 16:34 PM)pshoey Wrote: I am working on a Launcher based solution to extract the programming data from the SDP packages. Thanks to pshoey for starting work on creating a launcher solution for the programming data, but in the meantime has anyone found and willing to share the long way to extract and relocate the programming data to the correct directories for ISTA 4? If this post helped you in anyway please use the thanks and/or REP buttons down here. Thanks!
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
4 Guest(s)
4 Guest(s)
Return to TopReturn to Content