Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Nissan Consult III+ Plus 51.11, 51.20, 51.32, 51.40, 51.51, 52.11
30-10-2016, 05:48 AM,
(This post was last modified: 30-10-2016, 05:51 AM by mattydr67.)
Post: #31
|
|||
|
|||
RE: Nissan Consult III+ Plus 51.11, 51.20, 51.32, 51.40, 51.51, 52.11
(19-10-2016, 18:16 PM)antonis 200 Wrote: Hi can i use consult 3 with my delphi vci 100251? Is this tool a PassThru j2534 one? If yes will works but as I know this is not a Passthru one and I never see any Passthru drivers for it if this it is. With other words will not work Good luck (27-10-2016, 09:12 AM)teris Wrote: The consult 3 plus, it working with cantiecar interface without problem!!! Hi teris If its working w/o problems please tell me if you can see the Live Data/Parameters Using AVDI you cannot see Live Data and as I know using a Passthru tool this is a functions that isn't works I'm curios if its working the Live Data using CanTieCar Good luck |
|||
31-10-2016, 10:08 AM,
Post: #32
|
|||
|
|||
RE: Nissan Consult III+ Plus 51.11, 51.20, 51.32, 51.40, 51.51, 52.11
Hi Matty,
It working the live data but not in all models. |
|||
Reputation: +1 - mattydr67 [+1] | |||
11-11-2016, 09:47 AM,
Post: #33
|
|||
|
|||
RE: Nissan Consult III+ Plus 51.11, 51.20, 51.32, 51.40, 51.51, 52.11
(26-11-2015, 17:45 PM)fantomel Wrote: You must also flash firmware from d-pdu api like in odis to put vas head in passthru mode, without that it will not work on any soft that require passthru. Also after you put in to odis again you must flash that fw for odis and so on, on each changement. Hello please help I have Installed pass thru and edit the registry but when I start application not seen the interface. Can you please help me how to flash the firmware for pass true. Thanks |
|||
21-11-2016, 03:00 AM,
Post: #34
|
|||
|
|||
RE: Nissan Consult III+ Plus 51.11, 51.20, 51.32, 51.40, 51.51, 52.11
I'm trying to access the rar file and they require a password
|
|||
23-11-2016, 07:31 AM,
Post: #35
|
|||
|
|||
RE: Nissan Consult III+ Plus 51.11, 51.20, 51.32, 51.40, 51.51, 52.11
Heya mate
I'm having trouble trying to get my Cantiecar V4 interface working with CS3+ I have copied the diagnostic.ini file for CTC Do I need to change registry??? Cheers Edit.... Now working. well LEDs flashing when I select Eng ECU. Will try on a car tomorrow !!!!!! *) (27-10-2016, 09:12 AM)teris Wrote: The consult 3 plus, it working with cantiecar interface without problem!!! |
|||
19-01-2017, 08:23 AM,
Post: #36
|
|||
|
|||
RE: Nissan Consult III+ Plus 51.11, 51.20, 51.32, 51.40, 51.51, 52.11
Consult 3 will work with Autel Maxiflash J2534 or NERS only?
|
|||
02-02-2017, 13:48 PM,
(This post was last modified: 02-02-2017, 14:41 PM by kmaverick.)
Post: #37
|
|||
|
|||
RE: Nissan Consult III+ Plus 51.11, 51.20, 51.32, 51.40, 51.51, 52.11
Hi , Can any one help me set up a cardaq 2 with this please
I have the software install and the cardaq drivers just not sure if i have edited the diagnostic tools file correct. (help please!) Please see below the details : [current_geographical_zones] market=3 area=6 country=EGB [current_language] language=GB [unit_conversion] unit_conv_1=G001. unit_conv_2=G002. unit_conv_3=G003. unit_conv_4=G004. [current_channel] channel=0 [system_management] access_mode=1 [device] vi_device_name=Cardaq Plus 2 [mode] debug_mode=TRUE debug_mode_vehicle_battery=TRUE [vehicles] tab_index=4 (11-11-2015, 14:55 PM)bellota Wrote: ..works with cardaq m ?.. Hi , Could you tell me how you edited the diagnostic tool file please many thanks |
|||
04-02-2017, 07:49 AM,
Post: #38
|
|||
|
|||
RE: Nissan Consult III+ Plus 51.11, 51.20, 51.32, 51.40, 51.51, 52.11
Guys,
I have problem with VAS5054a passthru. vmware windows 7 32 nissan consult 3 install OK.(change ini+registry rename) install VAS5054a passthru pack but softing DPU API ...008 when running I select DPU API version ...008 and push Parse file after empty my select mvci modul so i can not connect the vas5054 modul Can anybody help me? maybe the registry rename clear my mvci. |
|||
11-03-2017, 03:01 AM,
Post: #39
|
|||
|
|||
RE: Nissan Consult III+ Plus 51.11, 51.20, 51.32, 51.40, 51.51, 52.11
|
|||
24-03-2017, 03:52 AM,
Post: #40
|
|||
|
|||
RE: Nissan Consult III+ Plus 51.11, 51.20, 51.32, 51.40, 51.51, 52.11
(11-03-2017, 03:01 AM)KreativSS Wrote:(19-01-2017, 08:23 AM)xtac1080 Wrote: Consult 3 will work with Autel Maxiflash J2534 or NERS only? I make instructions for you. Let me know if you have questions. |