[Gini]

Hi brunoman,
happy new year and thank you for your feedback

First, please make sure your KOMBI has a VIN via the "Expert"Tab
Ecu: D_KOMBI
Job: C_FG_LESEN
=> Run Job

Then select the checkbox "Expert Mode" and read the KOMBI again via "Units" Tab

[temsky740]

What can this version with 8HP gearbox ?

[Gini]

Hi temsky740,
happy new year

Could you please type a new post instead of replying to another post
This makes the thread easier to read

Could please be more precise. Sorry, I don't understand your question

[temsky740]

Happy new year too !!!
I ask about operations, which program can do with ZF 8hp (read, write eeprom/ram/flash - something in this case).

[brunoman]

Hi brunoman,
happy new year and thank you for your feedback

First, please make sure your KOMBI has a VIN via the "Expert"Tab
Ecu: D_KOMBI
Job: C_FG_LESEN
=> Run Job

Then select the checkbox "Expert Mode" and read the KOMBI again via "Units" Tab

Hi! GINI,
Thank you for your explanation and Happy new year!
Do other modules(like cas..) have to be done in the same procedure?

[Gini]

Dump EGS using Dr.Gini

[temsky740]

Aha. On the screen we have 6HP. What about 8HP ? Will i get such information too ?

[Gini]

You have to try with G_EGS since it's a F series
Sorry, I don't a 8HP to try it myself

Please post a screenshot of your results
lt should take about 20mins to dump the EGS, so use a battery charger

[Notorious99]

Happy new year.

Is it possible to change the scale of the tachometer on E60 with expert mode?[/b]

[Gini]

Hi Notorious99
happy new year

yes, everything is possible via the Expert tab

Could you please edit your post :
http://cartechnology.co.uk/showthread.ph...#pid208870

Please remove the [quote....] [/quote]