[ndou007]

Hi all. I have a problem with a Honda mobillio cluster 2014. I read the small eeprom s93s66bd as 93c66 with an eeprom reader. I wanted to change kilometer with using nyo, only to find nyo doesn't have mobilio in it and no similar latest car with 93c66 was listed. but when you open one of the cars in nyo with 93c76 eeprom it shows the correct mileage. so i change the mileage using 93c76 with nyo and write the new file back to the eeprom ofcourse with 93c66 setting. now the cluster doesn't work. even if i write original file back it still doesn't work. It comes on but doesn't show mileage. When you start car rev counter doesn't work anymore.

What can I do to make the cluster normal again? or doesn't anyone have a virgin file or a working file for this mobilio cluster? Original dump attached. thanks in advanced.

[ombra]

If I were you I would do the following controls ...
welds
position eeprom
accurate reading of memory

[zckariya70]

U corrupted ur dump mate , now i corrected ur file and ready to use, ur file have 135827 write this file and tell me how it works , if u need to edit the km let me know i can do it for u.........




Regards

Z

[ndou007]

U corrupted ur dump mate , now i corrected ur file and ready to use, ur file have 135827 write this file and tell me how it works , if u need to edit the km let me know i can do it for u.........




Regards

Z

Thanks hope it works. Can you please correct kilometer to 75000?

[zckariya70]

Here is the file for u.................

[ndou007]

Here is the file for u.................

Wow and wow. It worked. Thanks a million. The only problem is the engine light and the seat belt light is not going off.