Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA P 2.51.3 VM
22-02-2014, 22:17 PM,
(This post was last modified: 23-02-2014, 00:46 AM by volavka.)
Post: #61
|
|||
|
|||
RE: ISTA P 2.51.3 VM
(22-02-2014, 19:18 PM)beemerboy88 Wrote: try this: I tried the above procedure exactly. Changed all .vmdk files Parent CID's to the parent CID of isss.vmdk. I then try to book and get the famous error: "The parent virtual disk has been modified since the child was created. The content ID of the parent virtual disk does not match the corresponding parent content ID in the child Cannot open the disk 'C:\Users\D and R Mobile\Desktop\ISTA-P\ISSS-000003.vmdk' or one of the snapshot disks it depends on. Module DiskEarly power on failed. Failed to start the virtual machine." I have a 3rd Gen Intel i7 CPU My laptop is a HP Probook 4540s Now when I change the 000003.vmdk back to original parent CID of extracted english snapshot I get the : "Windows could not start because the following file is missing or corrupt: windows/system32/config/system" No matter what it either gives me child disk error if i chang all parent CIDs or system corrupt message if I change all but 000003. Also, with original snapshot files with torrent I can get to boot but with WMI connection failure shortly after windows xp splash screen. |
|||
22-02-2014, 23:19 PM,
(This post was last modified: 23-02-2014, 00:46 AM by volavka.)
Post: #62
|
|||
|
|||
RE: ISTA P 2.51.3 VM
(22-02-2014, 22:17 PM)civicsi Wrote: I tried the above procedure exactly. Changed all .vmdk files Parent CID's to the parent CID of isss.vmdk. Check that you are starting the snapshots correctly (right click istap tab > snapshots). There should be no boot and no windows xp splash screen. Snapshots should restore direct to istap main screen. |
|||
Reputation: +1 - volavka [+1] | |||
23-02-2014, 02:07 AM,
Post: #63
|
|||
|
|||
RE: ISTA P 2.51.3 VM
Everything is working now. I really appreciate all of your help!
|
|||
24-02-2014, 04:36 AM,
Post: #64
|
|||
|
|||
RE: ISTA P 2.51.3 VM
Can not connect to ICOM clone and ICOM red dot
|
|||
24-02-2014, 22:42 PM,
Post: #65
|
|||
|
|||
RE: ISTA P 2.51.3 VM
(24-02-2014, 04:36 AM)supBMW e39 Wrote: Can not connect to ICOM clone and ICOM red dot Try updating firmware to 3.10.44. http://garage-automotive.com/showthread.php?tid=2583 |
|||
Reputation: +1 - volavka [+1] | |||
27-02-2014, 21:11 PM,
Post: #66
|
|||
|
|||
![]()
The biggest lie expertmod version !!!!!
After a real test not talk on the net, it seems that the famous version expertmode failed the test. After deselecting an ecu need to do "determine action plan". After this step ecu is back in the same condition as at first appointment. Test with icom. |
|||
27-02-2014, 22:19 PM,
Post: #67
|
|||
|
|||
RE: ISTA P 2.51.3 VM
(27-02-2014, 21:11 PM)baba Wrote: The biggest lie expertmod version !!!!! Sir, expert mode works. Follow the instructions in the attached PDF. |