[spanaz1]

CAN ANYONE HELP THE WAY TO ADD 4C KEY INTO IMMO DATA? WHAT IS NEEDED TO DO THIS, AND WHATS THE PROCEDURE.
THANKS IN ADVANCE

[service]

Hi, first you must read immo data and repere the identification on key, second step you must read the ID of the chip 4C you will programme, and write this ID on the immo data.
i send you bellow attached an example for old ford fiesta with immo (tms).

If I help you please give thanks and reputation.

regards

[spanaz1]

Ok, now to write the key id do you use a software or you can write it manually because i dont see the key data in the immo data as it is shown on the picture with key tiris

[daniersms]

Again spanaz1 if you post the tiris data of the key you want to use and the the file from the 24c02 in the ecu I will add the key for you manually

[fiazhnd]

Ok, now to write the key id do you use a software or you can write it manually because i dont see the key data in the immo data as it is shown on the picture with key tiris

Mostly different manufacturer use different file structure but as per this attach file you can find the key data on line 0x0c4 to 0x0cf same data is repeated on line 0x01c

[service]

Hello, yes you write the ID manually, in this example it is TMS not 24c02 eprom, I read ID with TMPRO.
regards

[daniersms]

Yes spanaz is trying to add a key to a Motronic Bosch V1.5.5 ecu for a Ford Bantam

[spanaz1]

That is true, but i thought instead of asking all the time is better to learn.
attached is the data for the ford buntum with 24c02 and key to add Daniersms

[daniersms]

It was send to you