Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA v4.05.31 Standalone
|
30-05-2017, 19:16 PM,
Post: #41
|
|||
|
|||
RE: ISTA v4.05.31 Standalone
(30-05-2017, 12:26 PM)AutoExe3219 Wrote: For registry is the same. Files are correct. Only other thing two things I have seen to cause this is some blocked file or missing prerequisite software. You could try moving to root directory of another drive, rebooting, and running again. |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
30-05-2017, 22:41 PM,
Post: #42
|
|||
|
|||
|
RE: ISTA v4.05.31 Standalone
The problem is solved.
it is my mistake.pshoey's file is .7z but i run winrar5.31 to unpack it. 7z to unpack it again and work fine. thanks all~ Press
![[Image: postbit_reputation.gif]](https://cartechnology.co.uk/images/CarTechnologyTheCure/english/postbit_reputation.gif) and![[Image: Qi7qHzl.jpg]](https://i.imgur.com/Qi7qHzl.jpg) , If this post helped you. |
|||
|
|
|
30-05-2017, 23:28 PM,
Post: #43
|
|||
|
|||
RE: ISTA v4.05.31 Standalone
(30-05-2017, 22:41 PM)AutoExe3219 Wrote: The problem is solved.Winrar is fine, but update to at least 5.40. |
|||
|
|
|
30-05-2017, 23:46 PM,
Post: #44
|
|||
|
|||
|
RE: ISTA v4.05.31 Standalone
Has anyone had an issue where the SOFTWARE UPDATE button is grayed out? I have my install setup for Motorrad and it appears there is some files missing for the ECU programming. Maybe I have a registry path wrong?
|
|||
|
|
|
31-05-2017, 04:39 AM,
Post: #45
|
|||
|
|||
|
RE: ISTA v4.05.31 Standalone
Guys i have installed ISTA and can diagnose and clear faults with the car but when trying to do programming i get this error shown below. Any ideas what could be the problem?
|
|||
|
|
|
31-05-2017, 06:08 AM,
Post: #46
|
|||
|
|||
RE: ISTA v4.05.31 Standalone
(30-05-2017, 23:46 PM)BMWS1000RR Wrote: Has anyone had an issue where the SOFTWARE UPDATE button is grayed out? I have my install setup for Motorrad and it appears there is some files missing for the ECU programming. Maybe I have a registry path wrong? (31-05-2017, 04:39 AM)Conne11 Wrote: Guys i have installed ISTA and can diagnose and clear faults with the car but when trying to do programming i get this error shown below. Any ideas what could be the problem?Start x32 and x64 regfixes from your Rheingold folder. Gesendet von meinem HTC 10 mit Tapatalk NBT EVO Apple CarPlay Full Screen, Navigation, Video in Motion, SSH, CP
EntryNav EVO Apple CarPlay, Navigation, CP, SSH, full FSC Pack BMW FSC Retrofit CIC/NBT/EVO 8HP ISN Reset F Series Remote Remote VAG Navigation Update, Apple CarPlay and Android Auto Programming and Coding |
|||
|
|
|
31-05-2017, 09:19 AM,
(This post was last modified: 31-05-2017, 09:21 AM by OPaul.)
Post: #47
|
|||
|
|||
|
RE: ISTA v4.05.31 Standalone
When I try to Complete Indentification of the car with ista 4.05.31 the window of Outgoing background appears but just fore 1 sec and then nothing is happening . With ISTA 4.5.23 I can identify the car end everything is ok ... But in ista 4.05.31 doesn't work , everytime the window is showing but just for 1 sec. And
 Rep and Thanks if my post have helped  |
|||
|
|
|
31-05-2017, 09:23 AM,
Post: #48
|
|||
|
|||
RE: ISTA v4.05.31 Standalone
(31-05-2017, 09:19 AM)OPaul Wrote: When I try to Complete Indentification of the car with ista 4.05.31 the window of Outgoing background appears but just fore 1 sec and then nothing is happening . With ISTA 4.5.23 I can identify the car end everything is ok ... But in ista 4.05.31 doesn't work , everytime the window is showing but just for 1 sec. And Have a look at post #10 in this thread http://cartechnology.co.uk/showthread.php?tid=24395 |
|||
|
|
|
31-05-2017, 21:03 PM,
(This post was last modified: 01-06-2017, 12:06 PM by Bimmer540.)
Post: #49
|
|||
|
|||
|
RE: ISTA v4.05.31 Standalone
Need Icom A2 and Next the newest firmware to work with 4.05.31?
I update A2 with lastest firmware and everything works fine. Can I update Next with the newest firmware without problems? Or must I wait for this one? http://cartechnology.co.uk/showthread.php?tid=23884 |
|||
|
|
|
01-06-2017, 21:33 PM,
(This post was last modified: 01-06-2017, 21:34 PM by OPaul.)
Post: #50
|
|||
|
|||
|
RE: ISTA v4.05.31 Standalone
That works , but now I have this problem , the connection doesn't show...
Rep and Thanks if my post have helped |
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
