Possibly Related Threads…

***dynamicsteam*** · (This post was last modified: 19-10-2017, 14:39 PM by Clusters.)

Hello,

Has anyone got a good working virgin file for electric power steering module on a Clio 3 please? Module is TRW and part number 8200 294 979-A Fault code DF002

I have original dump from 24LC16 if that helps

Many Thanks !

***ar257*** · 03-06-2017, 20:09 PM,

Hi file work ok 100/100

***dynamicsteam*** · 04-06-2017, 06:38 AM,

Thank you. I will report back tomorrow when I get time to try.

Kind Regards

***dynamicsteam*** · (This post was last modified: 06-06-2017, 05:33 AM by dynamicsteam.)

(03-06-2017, 20:09 PM)ar257 Wrote: Hi file work ok 100/100

Steering working OK again, many thanks I have a configuration fault. I have programmed VIN and calibrated steering angel sensor which now shows status 4 which is correct. Anything else I have to configure?

Mike

***dejwa*** · 06-06-2017, 06:48 AM,

(05-06-2017, 17:23 PM)dynamicsteam Wrote:
(03-06-2017, 20:09 PM)ar257 Wrote: Hi file work ok 100/100

Steering working OK again, many thanks I have a configuration fault. I have programmed VIN and calibrated steering angel sensor which now shows status 4 which is correct. Anything else I have to configure?

Mike

Try with this software

***vaidisvaidis*** · 06-06-2017, 08:29 AM,

(06-06-2017, 06:48 AM)dejwa Wrote:
(05-06-2017, 17:23 PM)dynamicsteam Wrote:
(03-06-2017, 20:09 PM)ar257 Wrote: Hi file work ok 100/100

Steering working OK again, many thanks I have a configuration fault. I have programmed VIN and calibrated steering angel sensor which now shows status 4 which is correct. Anything else I have to configure?

Mike

Try with this software

hi which adapter need to use ,thanks

***dejwa*** · 06-06-2017, 10:29 AM,

(06-06-2017, 08:29 AM)vaidisvaidis Wrote:
(06-06-2017, 06:48 AM)dejwa Wrote:
(05-06-2017, 17:23 PM)dynamicsteam Wrote:
(03-06-2017, 20:09 PM)ar257 Wrote: Hi file work ok 100/100

Steering working OK again, many thanks I have a configuration fault. I have programmed VIN and calibrated steering angel sensor which now shows status 4 which is correct. Anything else I have to configure?

Mike

Try with this software
hi which adapter need to use ,thanks

clip

***dynamicsteam*** · 06-06-2017, 18:05 PM,

(06-06-2017, 10:29 AM)dejwa Wrote:
(06-06-2017, 08:29 AM)vaidisvaidis Wrote:
(06-06-2017, 06:48 AM)dejwa Wrote:
(05-06-2017, 17:23 PM)dynamicsteam Wrote:
(03-06-2017, 20:09 PM)ar257 Wrote: Hi file work ok 100/100

Steering working OK again, many thanks I have a configuration fault. I have programmed VIN and calibrated steering angel sensor which now shows status 4 which is correct. Anything else I have to configure?

Mike

Try with this software
hi which adapter need to use ,thanks

clip

I have worked out the configuration error. I will leave steps here incase others have same problems.

With virgin steering file loaded you must do following with clip tool.

Enter VIN number
Calibrate steering angle sensor
Program size of tyres and engine type. In my case a K engine 195 x 60 tyres

After doing this steering working and no fault codes

Many thanks to everyone who helped !

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	JLR 9HP48 TCM Virgin?	JNC	5	66	4 hours ago Last Post: JorBo
	BSI Valeo J01 Virgin/Clone	r0my81	4	51	Yesterday, 10:56 AM Last Post: dabaca
	vl300 file need please	BoNzO	3	64	Yesterday, 08:59 AM Last Post: raffy haddad
	mercedes w211 virgin	salliemohamed	3	41	15-06-2024, 22:49 PM Last Post: salliemohamed
	clio 3 1.6 S3000 virgin dump need	galisdoo	2	65	14-06-2024, 06:36 AM Last Post: galisdoo
	Porsche M531 Virgin Flash Dump	dan_189	0	29	11-06-2024, 23:16 PM Last Post: dan_189
	Nissan Qashqai edc16cp33 virgin	remi87	1	44	11-06-2024, 08:55 AM Last Post: reda7575
	Mercedes EDC16CP31 need virgin/ECU Renew	popov	0	42	10-06-2024, 08:20 AM Last Post: popov
	sid 310 virgin	scoc	1	70	08-06-2024, 10:24 AM Last Post: AmineBen1992
	MB C220 virgin epprom ecu delphi crd11	Radco555	1	72	30-05-2024, 19:18 PM Last Post: Automotive 1

Contact Us