Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Odis engineering parameter data for keyless entry
24-07-2017, 14:06 PM, (This post was last modified: 24-07-2017, 14:11 PM by apoelistas.)
Post: #1
Odis engineering parameter data for keyless entry
Does anyone know how to add parameter data in immobilizer 05 / comfort unit 046 (8k0907064CQ) in order to enable keyless entry (kessy) with Odis engineering in my Audi B8 (Q5) prefacelift which was retrofitted with keyless access??????

Parameter data is not included in my new comfort unit.

I don't have VCP yet which can add this parameter to my comfort unit.

VCDs, Odis--S and Odis-E cannot let me input the coding in 05 stg, byte 2 bit 4 (from 0 to 1).

I need help to add keyless entry parameter with Odis engineering 6.6.1.

I have 4 door sensors and 4 antennas.

How can I save my 05 parameter and modify it in order to enable keyless entry too???

My start stop button works perfect after retrofit, however keyless entry parameter is disabled and I cannot select coding.

Any ideas how this is performed with Odis-E???

VCP parameter data is available in zdc files which can be flashed.

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
24-07-2017, 15:28 PM,
Post: #2
RE: Odis engineering parameter data for keyless entry
Parameter data is loaded by ODIS-S online ,but if you have retrofitted keyless then you can't do it this way.
I think your only solution is VCP ,I don't think is possible with ODIS-E.
I you need I can send you .zdc file for VCP ,but ODIS-E don't support .zdc files.
Quote this message in a reply
[+] 2 users say Thank You to MarcinOslo for this post
24-07-2017, 16:11 PM, (This post was last modified: 24-07-2017, 17:08 PM by apoelistas.)
Post: #3
RE: Odis engineering parameter data for keyless entry
Cheers for your reply. I will appreciate if you could send me the .zdc for keyless entry authorization (8k0907064CQ) for pre-facelift audi Q5 (B8). Possibly I will need it.

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
24-07-2017, 17:33 PM,
Post: #4
RE: Odis engineering parameter data for keyless entry
There is only one .zdc file which has keyless data for 8K0907064CQ

Maybe it will helps you somehow.


Attached Files
a5PA_start_auth_8K0907064Cx,Kx.zdc.txt
File Type: .txt
Downloaded: 100 times
Size: 74 bytes

Quote this message in a reply
[+] 4 users say Thank You to MarcinOslo for this post
24-07-2017, 18:17 PM, (This post was last modified: 24-07-2017, 18:53 PM by apoelistas.)
Post: #5
RE: Odis engineering parameter data for keyless entry
(24-07-2017, 17:33 PM)MarcinOslo Wrote:  There is only one .zdc file which has keyless data for 8K0907064CQ

Maybe it will helps you somehow.

Please I need your advice.
Would the following file be more approproate for the Q5? What is your opinion?? I have the pdf list but not the zdc files.
q5PA_bcm2_8k0907064Cx,Ex,Fx,Gx,Hx,Jx.zdc . Does this have keyless data??
Also do you know what PA means (Q5PA)??
PA does it not mean facelift???
Thanks

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
24-07-2017, 18:48 PM,
Post: #6
RE: Odis engineering parameter data for keyless entry
Hi............
When again you make happy your local dealer cashcashcashcash for your car then be sure you will forgot your summer vacations for some more years m8.........tears
Just an advice.......... you can accept or you can drop............evilgrin
Regarts.......beer
Quote this message in a reply
[+] 2 users say Thank You to vagvag for this post
24-07-2017, 18:50 PM,
Post: #7
RE: Odis engineering parameter data for keyless entry
There is 4 or 5 files for 8K0907064CQ ,I opened and checked all of them but only the one I posted above contain Keyless data ,all the rest have only data for rear lamps.

The one above has data for A5 Coupe and Sportback which has 4 doors ,so I think should fit for Q5 as well.

I don't know what means "PA"
Quote this message in a reply
[+] 2 users say Thank You to MarcinOslo for this post
24-07-2017, 18:57 PM, (This post was last modified: 25-07-2017, 12:06 PM by apoelistas.)
Post: #8
RE: Odis engineering parameter data for keyless entry
Cheers. Obliged for the file and explanation.

Is it easy to give the main steps with VCP in order to flash this parameter zdc file a5PA_start_auth_8K0907064Cx,Kx.zdc?? Thanks

Your procedure will help me carry out the flash correctly.

(24-07-2017, 18:48 PM)vagvag Wrote:  Hi............
When again you make happy your local dealer cashcashcashcash for your car then be sure you will forgot your summer vacations for some more years m8.........tears
Just an advice.......... you can accept or you can drop............evilgrin
Regarts.......beer

I like to gamble, with car technology upgrades. I believe I know what you mean (instrument cluster adventure D-day). It was a near miss to a new instrument cluster purchase but at the end finding a vas5054a I managed to flash to latest firmware.

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
25-07-2017, 14:34 PM,
Post: #9
RE: Odis engineering parameter data for keyless entry
Q5 keyless entry requires only ODIS-E to write parameters and modify the code
Quote this message in a reply
[+] 2 users say Thank You to yang1120 for this post
25-07-2017, 16:34 PM, (This post was last modified: 25-07-2017, 20:47 PM by apoelistas.)
Post: #10
RE: Odis engineering parameter data for keyless entry
(25-07-2017, 14:34 PM)yang1120 Wrote:  Q5 keyless entry requires only ODIS-E to write parameters and modify the code

I have Odis engineering 6.6.1. Please can you guide how to write parameters and modify the code??
Cheers

Note:
The coding for keyless entry in control module 05 immobilizer is byte 2 bit 4.
When I change bit 4 from 0 to 1 I get code sidblush22 which means not recognized.

I think I can save the .xml file of 05 control unit, but I dont know what to modify. I can write the xml parameter back to replace the existing.

Both read and write are on option no 46.

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
Lamborghini ODIS Service 23.2.2 + Activations justdiag 49 2,708 5 hours ago
Last Post: billyleon
0Scope ODIS-Engineering 12.2 Postsetup 1060 (test) Tadk 260 33,312 Yesterday, 08:58 AM
Last Post: Versus
ZTAudi Audi A6 2024 seat belt warning deactivate with odis samiralena 3 117 Yesterday, 06:58 AM
Last Post: samiralena
0Scope ODIS-Service 7.2.1 Postsetup 4000 (test) Tadk 1,018 97,561 27-03-2024, 16:07 PM
Last Post: jokir
  ODIS-Service_update_23_0_1-EU_20240306_Postsetup_230001.105.1130_test Tadk 274 16,450 26-03-2024, 07:50 AM
Last Post: pablo202
0Scope ODIS JVM/JRE STARTUP ERROR FIX DavidForgac 1 566 25-03-2024, 06:50 AM
Last Post: wxhank
00Windows ODIS-Service 6.2.0 Postsetup 4000 (test) Tadk 171 12,192 19-03-2024, 07:10 AM
Last Post: Tomey
ZVW ODIS-S23 ODIS-E17 FULL no encryption chinese patch Chipcar 3 937 14-03-2024, 20:25 PM
Last Post: gyozo75
ZVW Odis Engineering 14 + Activations fantomel 345 39,342 11-03-2024, 21:27 PM
Last Post: koyot
ZTAudi ODIS-E, iDEX, CP-Tool, System42, web42 ieee754 0 255 11-03-2024, 20:22 PM
Last Post: ieee754

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content