[Mex165]

Does anybody have this flash for ODIS:
5K0953569T sw0136

Mine is on sw0122 and not compatible with LIN 1.3 and 2.0.

Need it for a MFSW retrofit on a Passat B6.

Thank you, in advance

[spido]

Does not exist....but...the steering is ok?
I have not found 569T wich not suport lin 2.0. And ....I've fitted a lot.

[spido]

And read this:

Rule 3: Do not Post Links on the Board! External links must be attached in a notepad file.

Thanks, Admin

Like this

[Mex165]

Yes, but i need flash file for 569T 0140.
Cannot find it anywhere

[spido]

Not exist update. Just try read eeprom whith an programator from one T good and write on another T .I dont now if work...

[Mex165]

Here is the file...!

[spido]

Thanks Mex.But for 5k0953569H you now a version file for it/
i have one 569H whit sw 8xo.....for Audi an want to fit in vw car but dont see MFSW butons....
I think whit another sw version to work....but i cant find a sw good.

[apoelistas]

Did you check steering wheel codings (control unit 16?). I have read cases where firmware update (in certain cases) changes the coding. Before upgrading/downgrading firmware check if SW codings are correct. Also check if there is a region selection coding in this control unit (and change that to yours if different).

[spido]

I check coding amd is ok but 569H cant see steering whell butons.No options to change region.
569H had a sw for AudiA1 or Q3
where stalk is 8x0953...
I think i will try to update 16 whit 5k0953501N 014 and see...

[apoelistas]

What was your initial software version and name?? Do you have an old VCDs log of your control unit 16?
Did you always have MF?? Does your control unit support MF in hardware?
Did you retrofit MFSW?