Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Unsupported  [Diagnostic] Dr.Gini - B022 - 08 Oct 2018
22-10-2017, 17:39 PM,
Post: #1231
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017
You guys are unbelievable smile
All free and right now!

You have to know that there is a lot of work and investments in background
and also a lot of fantastic guys participating positively to this project

So, please be patient. I'm doing my best with what I have
Reputation: +3 - hulahans [+1] , umutbulut [+1] , Tombo [+1]
[+] 36 users say Thank You to Gini for this post
22-10-2017, 20:18 PM, (This post was last modified: 22-10-2017, 20:24 PM by teerak2uk.)
Post: #1232
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017
(18-10-2017, 12:39 PM)JBPBeast Wrote:  1. In order to get Dr.Gini Program work, a program called Ediabas must be properly installed.

2. BMW cars produced before 2003 are not supported yet.

3. Dr.Gini Program need these communication interfaces:

BMW ICOM A2

BMW ICOM Next

BMW K+DCAN Cable

BMW ENET Cable




How to install 2017 BMW Dr. Gini Diagnostic Program?

Step 1: Before install Dr.Gini, first you need to install EDIABAS.

In the EDIABAS folder, run the EDIABAS _7.3.0.msi file to install the EDIABAS program.

It is recommended that you do not change any settings during installation.






Step 2: Unpack the "Setup Dr.Gini B014 EN.zip" and run the program to install Dr.Gini.

At the end of the installation, the menu that you want to run the program is checked, but since the setup is not completed yet, it is unchecked and the installation is completed.




Step 3: After extracting the compressed files in the ECU folder, copy them to the ECU folder where EDIABAS program is installed.

If you did not change the settings during installation, this is the C:\ EDIABAS\ ECU folder.




Step 4: Copy the EDIABAS.INI file located in the "INTERFACES" folder→ ENET Ediabas.INI folder and overwrite the C: \ EDIABAS \ BIN folder, as Dr.Gini will be connected by the ENET cable.

You need to copy the api32.dll file in the "API32.DLL" folder to the folder below for each operating system.

For Windows 7/8 / 8.1 / 10 64-bit operating systems:

C:\Windows\SysWOW64

For Windows 7/8 / 8.1 / 10 32-bit operating systems:

C:\Windows\System32




Step 5(The final step): Copy the Gini_B020.exe file to the C: \ EDIABAS \ BIN folder.

Sometimes, Gini_B020.exe is recognized as a malicious program and may be removed from an anti-virus program. If you feel that this process is unstable, you can just delete this file.




OK. Now BMW Dr. Gini installation is complete!

Connect your car with BMW Dr. Gini via BMW ICOM, ICOM NEXT, INPA K+DCAN Cable or ENET Cable. And it's ready to use!

Turn on car ignition and run the Dr.Gini.exe located in the C:\EDIABAS\BIN folder.

Click the "Identification" button at the bottom of the screen. Then the software will directly connect to vehicle.



Does this look correct as instructions to install?
Nope still dont work for me

   
22-10-2017, 20:57 PM, (This post was last modified: 22-10-2017, 21:17 PM by ivo1bg.)
Post: #1233
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017
Unfortunately after this procedure I have not working INPA any more. I didn't make a backup copies of the api32.dll and the ediabas.ini files which I replaced and now I am searching for them. When I click on Ediabas tab in Menu I get this error: Configuration update error. Would someone help me to resolve this issue?
26-10-2017, 15:12 PM,
Post: #1234
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017
(22-10-2017, 20:18 PM)teerak2uk Wrote:  
(18-10-2017, 12:39 PM)JBPBeast Wrote:  [i]
Nope still dont work for me


Dr. Gini himself replied to my post and said some of the steps I had shown are now unnecessary.

I haven't had a chance to try again, should be able to find some time soon and will post my results.
27-10-2017, 06:50 AM, (This post was last modified: 27-10-2017, 06:55 AM by Gini.)
Post: #1235
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017
How to Install Dr. Gini
all necessary files following the link on the first post of this thread

1. Ediabas
-> use the installer with default settings
-> update the ECU folder

2. Dr.Gini
-> use the installer with default settings





teerak2uk and JBPBeast,
please delete the wrong installation instructions from your respective posts

Before posting any instructions, please test them first
Reputation: +2 - Pl@y3R [+1] , umutbulut [+1]
[+] 6 users say Thank You to Gini for this post
27-10-2017, 07:35 AM,
Post: #1236
[Diagnostic] Dr.Gini - B021 - 14.06.2017
And need to copy specific edibias.ini when using K+DCAN Cable ?
27-10-2017, 11:56 AM, (This post was last modified: 27-10-2017, 11:58 AM by Gini.)
Post: #1237
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017
Please edit your post Post #1232
Remove these wrong instructions

No, just follow my instructions in Post Post: #1235
Interfaces are managed via the Dr.Gini once installed (Menu --> Interface)
31-10-2017, 17:44 PM,
Post: #1238
XZBMW  RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017
Just downloaded and tried out Dr GINI for the first time on my 2014 F10. Awesome work - many thanks to Gini!! congrats

When I read the error codes for my car I see a page of horizontal lines - some marked in red. How do I know which of the date in each line is the error code? Is there a quick primer on using Dr. Gini for reading error codes?

I read on another forum that GINI only lists the last four digits of the error code - I'm not sure where to start so I thought I'd ask the source.

Thanks!
01-11-2017, 07:02 AM,
Post: #1239
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017
Errors codes without description are not translated yet
17-11-2017, 18:36 PM, (This post was last modified: 18-11-2017, 18:21 PM by Pl@y3R.)
Post: #1240
[Diagnostic] Dr.Gini - B021 - 14.06.2017
Hi, i have 2 laptops, in 1st W7 64 bits, everything works fine ,
2nd one W7 32 bits i've installed today gini, ediabas 7.3.0 and changed ecu from 1st post, ediabas connect to the car, but when i open gini nothing happens. Thanks for any help
-------------------SOLVED-----------------
I've checked Dr.Gini properties. Compatibility was enable to run for W7, after disable everything works fine[THUMBS UP SIGN]


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW coding 2018 bmw bike with ncs expert carlosabh71 11 1,395 16-03-2024, 08:01 AM
Last Post: TheNine90
XZBMW bmw f15, x5 2018 redog4dy 0 114 19-01-2024, 08:29 AM
Last Post: redog4dy
XZBMW BMW 2018 F39 - Used BDC installed- HWEL chrisi1909 24 991 15-01-2024, 13:23 PM
Last Post: Node
XZBMW Dr. Gini actived or cracked and one have link please? rana 15 3,041 15-11-2023, 20:19 PM
Last Post: tinkerman
  A2l hex codes for bmw 2018 m550i WorkB23 0 201 26-09-2023, 19:50 PM
Last Post: WorkB23
XZBMW Remote Diagnostic Qwerti 16 3,946 28-03-2023, 14:27 PM
Last Post: DarkSide
XZBMW Bmw g31 2018 MGU id7 retrofit. LogiHuś 0 308 26-03-2023, 20:57 PM
Last Post: LogiHuś
  BMW Road Map Europe West MOTION 2018-1 Dany 3 369 19-03-2023, 08:31 AM
Last Post: dumitru.o
XZBMW Solved ✔ 2018 X3 (G01) ENTRYNAV2 larger screen markodsk 10 1,377 25-02-2023, 21:41 PM
Last Post: markodsk
XZBMW 2018 540i mgu retrofit Ace540i 8 905 25-01-2023, 15:02 PM
Last Post: BugFix

Forum Jump:


Users browsing this thread:
7 Guest(s)

Return to TopReturn to Content