Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ODIS 4.2.3 does not recognize VAS6154
08-11-2017, 15:02 PM,
Post: #1
|
|||
|
|||
ODIS 4.2.3 does not recognize VAS6154
I have ordered a VAS 6154 SP308, everything installed WIN 7 32bit ODIS 4.2.3 works fine only interface does not recognize. It does install, it does not show VAS5054A in device Maneger, it only shows COM1.
I also tried via WLAN, but also without success. Can someone help me? |
|||
08-11-2017, 16:47 PM,
Post: #2
|
|||
|
|||
RE: ODIS 4.2.3 does not recognize VAS6154
(08-11-2017, 15:02 PM)georgia55 Wrote: I have ordered a VAS 6154 SP308, everything installed WIN 7 32bit ODIS 4.2.3 works fine only interface does not recognize. It does install, it does not show VAS5054A in device Maneger, it only shows COM1. VAS 6154 has to be connected to the car. |
|||
08-11-2017, 17:36 PM,
Post: #3
|
|||
|
|||
RE: ODIS 4.2.3 does not recognize VAS6154
Yes, I did too, but Odis does not recognize ignition
|
|||
08-11-2017, 17:58 PM,
Post: #4
|
|||
|
|||
RE: ODIS 4.2.3 does not recognize VAS6154
|
|||
08-11-2017, 18:01 PM,
(This post was last modified: 08-11-2017, 18:03 PM by apoelistas.)
Post: #5
|
|||
|
|||
RE: ODIS 4.2.3 does not recognize VAS6154
You need open configuration to select your hardware in odis (will read your vcx6154 hardware id). Then it will be recognised.
Dont try x64. |
|||
08-11-2017, 18:01 PM,
(This post was last modified: 08-11-2017, 18:03 PM by marour.)
Post: #6
|
|||
|
|||
RE: ODIS 4.2.3 does not recognize VAS6154
When install ODIS, you must choose 5054A not 6154
Or change it in the configuration. |
|||
08-11-2017, 18:18 PM,
(This post was last modified: 08-11-2017, 18:19 PM by georgia55.)
Post: #7
|
|||
|
|||
RE: ODIS 4.2.3 does not recognize VAS6154
(08-11-2017, 18:01 PM)marour Wrote: When install ODIS, you must choose 5054A not 6154 yes, I did that too, at the beginning I chose VAS6154, but to no avail (08-11-2017, 18:01 PM)apoelistas Wrote: You need open configuration to select your hardware in odis (will read your vcx6154 hardware id). Then it will be recognised. Can you tell me how can I do that? |
|||
08-11-2017, 18:19 PM,
(This post was last modified: 08-11-2017, 18:34 PM by marour.)
Post: #8
|
|||
|
|||
RE: ODIS 4.2.3 does not recognize VAS6154
|
|||
08-11-2017, 18:20 PM,
Post: #9
|
|||
|
|||
RE: ODIS 4.2.3 does not recognize VAS6154
|
|||
08-11-2017, 18:29 PM,
Post: #10
|
|||
|
|||
RE: ODIS 4.2.3 does not recognize VAS6154
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content