Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ODIS 4.2.3 does not recognize VAS6154
08-11-2017, 18:36 PM,
Post: #11
RE: ODIS 4.2.3 does not recognize VAS6154
(08-11-2017, 18:29 PM)apoelistas Wrote:  
(08-11-2017, 18:18 PM)georgia55 Wrote:  Can you tell me how can I do that?

Right hand
Configure
Select your vas
(Try both vas5054a and vas6154)

Change
Select
Change
Something like that
do you mean in device Maneger?
Quote this message in a reply
08-11-2017, 18:55 PM, (This post was last modified: 08-11-2017, 18:57 PM by apoelistas.)
Post: #12
RE: ODIS 4.2.3 does not recognize VAS6154
I did say odis. Did you find the selection???

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
09-11-2017, 00:27 AM,
Post: #13
RE: ODIS 4.2.3 does not recognize VAS6154
(08-11-2017, 15:02 PM)georgia55 Wrote:  I have ordered a VAS 6154 SP308,
Can someone help me?

I bet its not VAS6154. Its a vcx nano inside a VAS6154 looking body.
Quote this message in a reply
09-11-2017, 05:46 AM, (This post was last modified: 09-11-2017, 05:50 AM by apoelistas.)
Post: #14
RE: ODIS 4.2.3 does not recognize VAS6154
(09-11-2017, 00:27 AM)ninja_zx11 Wrote:  
(08-11-2017, 15:02 PM)georgia55 Wrote:  I have ordered a VAS 6154 SP308,
Can someone help me?

I bet its not VAS6154. Its a vcx nano inside a VAS6154 looking body.

Actually it must be a simplified version of vcx nano. Comparing the two vcx nano is more expensive to manufacture. However with vcx nano you need an extender.

It i a passthru device that either is recognised manually as vas5054a or vas6154 in odis configurator.

The problem with these devices because of inability of frmware upgrade downgrade with odis-e (since it is a different device) and maybe due to other hardware limitations it may be not be abe to flash or perform other functions. with odis-s it should work fine. As for geko users it was not checked if it can flash with SVM (odis-s).

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
09-11-2017, 08:05 AM, (This post was last modified: 09-11-2017, 08:23 AM by marour.)
Post: #15
RE: ODIS 4.2.3 does not recognize VAS6154
(09-11-2017, 05:46 AM)apoelistas Wrote:  Actually it must be a simplified version of vcx nano. Comparing the two vcx nano is more expensive to manufacture. However with vcx nano you need an extender.

It i a passthru device that either is recognised manually as vas5054a or vas6154 in odis configurator.

The problem with these devices because of inability of frmware upgrade downgrade with odis-e (since it is a different device) and maybe due to other hardware limitations it may be not be abe to flash or perform other functions. with odis-s it should work fine. As for geko users it was not checked if it can flash with SVM (odis-s).

Hi apoelistas,
So, do you mean J2534 passthru devices can not be used with ODIS-E for flashing?
Thanks,
Quote this message in a reply
09-11-2017, 11:10 AM, (This post was last modified: 09-11-2017, 11:13 AM by apoelistas.)
Post: #16
RE: ODIS 4.2.3 does not recognize VAS6154
With ODIS-E I have my doubts.

VCX nano tested and failed miserably.

Well unless its own app is high tech.

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
[+] 2 users say Thank You to apoelistas for this post
09-11-2017, 14:04 PM,
Post: #17
RE: ODIS 4.2.3 does not recognize VAS6154
I have installed Odis second time and vas5054 selected, still have no connection. which software is for passthru? I want to try with passthru software.
Quote this message in a reply
09-11-2017, 15:11 PM, (This post was last modified: 09-11-2017, 17:10 PM by apoelistas.)
Post: #18
RE: ODIS 4.2.3 does not recognize VAS6154
(09-11-2017, 14:04 PM)georgia55 Wrote:  I have installed Odis second time and vas5054 selected, still have no connection. which software is for passthru? I want to try with passthru software.

try also passthru selection and vas6154. Not sure which one works (it will detect its id)

(The following I hope you have already done: install vci manager, update firmware of vcx6154 from vci manager, and install odis driver update again from vci manager. Press Test did you get a pass??)

If you dont install vci manager your device will not work. I will try to add the link with installation instructions.
vcx6154.txt
File Type: .txt
Downloaded: 70 times
Size: 91 bytes


If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
[+] 3 users say Thank You to apoelistas for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
0Scope ODIS-Engineering 12.2 Postsetup 1060 (test) Tadk 260 33,299 7 hours ago
Last Post: Versus
ZTAudi Audi A6 2024 seat belt warning deactivate with odis samiralena 3 111 9 hours ago
Last Post: samiralena
0Scope ODIS-Service 7.2.1 Postsetup 4000 (test) Tadk 1,018 97,545 Yesterday, 16:07 PM
Last Post: jokir
  ODIS-Service_update_23_0_1-EU_20240306_Postsetup_230001.105.1130_test Tadk 274 16,403 26-03-2024, 07:50 AM
Last Post: pablo202
0Scope ODIS JVM/JRE STARTUP ERROR FIX DavidForgac 1 562 25-03-2024, 06:50 AM
Last Post: wxhank
Lamborghini ODIS Service 23.2.2 + Activations justdiag 48 2,681 23-03-2024, 11:40 AM
Last Post: justdiag
00Windows ODIS-Service 6.2.0 Postsetup 4000 (test) Tadk 171 12,182 19-03-2024, 07:10 AM
Last Post: Tomey
ZVW ODIS-S23 ODIS-E17 FULL no encryption chinese patch Chipcar 3 932 14-03-2024, 20:25 PM
Last Post: gyozo75
ZVW Odis Engineering 14 + Activations fantomel 345 39,338 11-03-2024, 21:27 PM
Last Post: koyot
ZTAudi ODIS-E, iDEX, CP-Tool, System42, web42 ieee754 0 251 11-03-2024, 20:22 PM
Last Post: ieee754

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content