[hojo29]

Which ISTA version works with the E39 M5?
I tried 3.53.13, 4.3.31 and 4.08.13 (everyone with Voltage Controll Tool), everything works but the dms screen remains empty, I can't hit next for the Vanos Test etc.

DIS is best for the old series.
And the picture is just the Identifikation of the controller with ISTA

[blax123]

Which ISTA version works with the E39 M5?
I tried 3.53.13, 4.3.31 and 4.08.13 (everyone with Voltage Controll Tool), everything works but the dms screen remains empty, I can't hit next for the Vanos Test etc.

DIS is best for the old series.
And the picture is just the Identifikation of the controller with ISTA

Don't want to use 100 different software, forget to get the screenshot fully, normally there should be at the bottom (down and next) but next is greyed out

[hojo29]

Which ISTA version works with the E39 M5?
I tried 3.53.13, 4.3.31 and 4.08.13 (everyone with Voltage Controll Tool), everything works but the dms screen remains empty, I can't hit next for the Vanos Test etc.

DIS is best for the old series.
And the picture is just the Identifikation of the controller with ISTA

Don't want to use 100 different software, forget to get the screenshot fully, normally there should be at the bottom (down and next) but next is greyed out

What is read out here with ICOM or KK Interface?
E39 is already very old and DIS is best here.
ISTA is for E87, E90, E60 as well as F and G series.

[blax123]

Which ISTA version works with the E39 M5?
I tried 3.53.13, 4.3.31 and 4.08.13 (everyone with Voltage Controll Tool), everything works but the dms screen remains empty, I can't hit next for the Vanos Test etc.

DIS is best for the old series.
And the picture is just the Identifikation of the controller with ISTA

Don't want to use 100 different software, forget to get the screenshot fully, normally there should be at the bottom (down and next) but next is greyed out

What is read out here with ICOM or KK Interface?
E39 is already very old and DIS is best here.
ISTA is for E87, E90, E60 as well as F and G series.

KK Interface but using Voltage Controll Tool to simulate Voltage
I had a version where it was working perfect but forgot which one..

[bimmer71]

With new release 4.08.21, or 21 I forget the Friday late in USA for g12 acsm fix , could I just update spd files and mod reg file or wait for new standalone version ?

[spider80]

With new release 4.08.21, or 21 I forget the Friday late in USA for g12 acsm fix , could I just update spd files and mod reg file or wait for new standalone version ?

U can update SDP, BLP and SQLiteDBs with istalauncher console.

[ChampioNbg]

With new release 4.08.21, or 21 I forget the Friday late in USA for g12 acsm fix , could I just update spd files and mod reg file or wait for new standalone version ?

U can update SDP, BLP and SQLiteDBs with istalauncher console.

Can be updated a standalone version over istalauncher console regarding the sdp, blp, sqllitedbs file?

Is there manual about that?

Thanks

[spider80]

With new release 4.08.21, or 21 I forget the Friday late in USA for g12 acsm fix , could I just update spd files and mod reg file or wait for new standalone version ?

U can update SDP, BLP and SQLiteDBs with istalauncher console.

Can be updated a standalone version over istalauncher console regarding the sdp, blp, sqllitedbs file?

Is there manual about that?

Thanks

Standalone version of ISTA-D can't be updated with istalauncher consol from pshoey. Only SDP, BLP and SQLiteDBs if U have all needed files.

[hulahans]

Installed now ista+ with all programming data from actual torrent, works good and fast!

[chucky001]

170/5000
Greetings! I have now exchanged Ista D 4.08.11. My question would be that this type can be used to extract the contents of a FUB into the google translator.