Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
13-11-2017, 22:40 PM,
Post: #581
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
I have an issue with this... I tried it before and it worked perfectly but I needed to reflash my CIC with 62.0 and once it was completed I lost my Navi and everything else.It seem it virginized itself.

When I put in the USB stick, no reboots but when i use E-Sys and do the first steps in the How-To. I get the Message Results OK for both of steps 2, I could sign the FSC but when I try to write the FSC to the car, I get an error

"code: RoutineControl returned negative response
description: service Routine Control Verify FSC returned positive response with with result status = FSCS_CERT_CHECK_FAILURE; ECU: HU_CIC_63_ETHERNET
severity: ERROR"

What could be the problem?

I have an early 2010 production 2011 F10', I retrofitted Combox to it only
Quote this message in a reply
14-11-2017, 15:54 PM,
Post: #582
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
I am stuck at "StoreSIGCert".
I followed the procedure to store "Sig" but it shows an error "Error: Please enter an Application Number and an Upgrade Index first". I do not see the howto that says I need to input them when doing this step. Anyone help me out of this. Thanks.
Quote this message in a reply
14-11-2017, 21:15 PM,
Post: #583
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(14-11-2017, 15:54 PM)ChrisF30 Wrote:  I am stuck at "StoreSIGCert".
I followed the procedure to store "Sig" but it shows an error "Error: Please enter an Application Number and an Upgrade Index first". I do not see the howto that says I need to input them when doing this step. Anyone help me out of this. Thanks.
Hi, put in fstool/parameter/Diagnose adress:63 Appl.-Nr.:1B,19,17...Upgrade index:1 VIN: Car's vin and try again.
Quote this message in a reply
14-11-2017, 21:32 PM,
Post: #584
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
Update on my post, I tried another USB Stick with NTSC format and the system rebooted itself but I'm still getting the error when I try to upload the FSC

Anyone know the solution for this?
Quote this message in a reply
14-11-2017, 23:37 PM,
Post: #585
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(14-11-2017, 21:32 PM)milzgatez Wrote:  Update on my post, I tried another USB Stick with NTSC format and the system rebooted itself but I'm still getting the error when I try to upload the FSC

Anyone know the solution for this?

When you flashed the CIC you probably overwrote the new root certificates with the original ones which is why your FSCs now fail.

I had issues with entering the FSCs and the only solution was to FTP a blank generalPersistencyData_DiagnosticsSWTController file onto the CIC and then re-enter everything.

I think the procedure is mentioned earlier in the thread.


Attached Files
generalPersistencyData_DiagnosticSWTController (1).zip
File Type: .zip
Downloaded: 103 times
Size: 402 bytes

Quote this message in a reply
15-11-2017, 04:17 AM,
Post: #586
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(14-11-2017, 23:37 PM)BaggieMatt Wrote:  
(14-11-2017, 21:32 PM)milzgatez Wrote:  Update on my post, I tried another USB Stick with NTSC format and the system rebooted itself but I'm still getting the error when I try to upload the FSC

Anyone know the solution for this?

When you flashed the CIC you probably overwrote the new root certificates with the original ones which is why your FSCs now fail.

I had issues with entering the FSCs and the only solution was to FTP a blank generalPersistencyData_DiagnosticsSWTController file onto the CIC and then re-enter everything.

I think the procedure is mentioned earlier in the thread.

For some reason, my Navi all of sudden started to work. I will try to do that with the other FSCs. Thank You
Quote this message in a reply
21-11-2017, 12:09 PM,
Post: #587
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
Is there an easy way to remove the script activation by intel to use this FSC method?
Quote this message in a reply
21-11-2017, 15:46 PM,
Post: #588
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(21-11-2017, 12:09 PM)blax123 Wrote:  Is there an easy way to remove the script activation by intel to use this FSC method?
Yes, by ftp (putty,filezilla) or flash the cic
Quote this message in a reply
21-11-2017, 16:30 PM,
Post: #589
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(21-11-2017, 15:46 PM)Pl@y3R Wrote:  
(21-11-2017, 12:09 PM)blax123 Wrote:  Is there an easy way to remove the script activation by intel to use this FSC method?
Yes, by ftp (putty,filezilla) or flash the cic

Don't wanna flash the CIC. Takes to long.
What do I have to do to remove it via ftp?
Quote this message in a reply
21-11-2017, 21:09 PM, (This post was last modified: 21-11-2017, 23:35 PM by lucidivo.)
Post: #590
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
I cant delete my old message, but already solved it thnx anyway
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Car Systems / Custom Retrofit Garage ENBT Adapter Ulsmak 33 1,418 Yesterday, 00:17 AM
Last Post: painsage
  G30 LCI Headlights retrofit: High Beam Laser light locking active tcp443 19 3,198 26-03-2024, 21:25 PM
Last Post: Satia
  G05 KAFAS4 enable code missing after Retrofit ACC 6ergsm 19 2,278 26-03-2024, 12:33 PM
Last Post: Hodgsonp
  F15 6WB Retrofit VIN Error moreply 4 175 25-03-2024, 07:24 AM
Last Post: RuleNormaliai
XZBMW bmw e70 cic fsc patcher help alexandru.so 3 106 25-03-2024, 01:00 AM
Last Post: Bakica
  MGU G30 retrofit , PDC does not show laso 3 169 24-03-2024, 14:35 PM
Last Post: laso
  Problem Retrofit electrified steering column on the G31 LCI smercki 12 323 22-03-2024, 12:55 PM
Last Post: Node
XZBMW BMW F01 Pre-LCI NBT EVO Retrofit Satia 3 211 21-03-2024, 12:53 PM
Last Post: Satia
  Bmw G31 retrofit Mgu id7 atm problem intranet 14 1,875 19-03-2024, 10:07 AM
Last Post: evaldazj
XZBMW F40 icam retrofit on entrynav2 Bavrian 8 313 17-03-2024, 10:18 AM
Last Post: Lpapp

Forum Jump:


Users browsing this thread:
1 Invisible User(s), 2 Guest(s)

Return to TopReturn to Content