Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA-D 4.08.21 Standalone / SQLiteDBs 4.08.20
27-11-2017, 13:13 PM,
Post: #71
RE: ISTA-D 4.08.21 Standalone / SQLiteDBs 4.08.20
(27-11-2017, 08:53 AM)Shinoby Wrote:  
(26-11-2017, 16:47 PM)Ibrahim24 Wrote:  I got everything working (finally) but when I try to diagnose my own car I got this: The Programming system could not be initialized. The ISTA installation may be damaged or incorrectly configured. Reinstall ISTA if problems persist contact local support.

I selected the ENET connection but yet I don't see KL15 and KL30
With DR. Gini program I can see 14 volts behind those 2...

Ant idea where I’m doing wrong...?

Same problem. Did the diagnosis with the ENET cable.
[Image: errorF20jp_3606855_28457003.jpg]

The database versions must match
Quote this message in a reply
27-11-2017, 14:21 PM, (This post was last modified: 27-11-2017, 14:23 PM by pdc.)
Post: #72
RE: ISTA-D 4.08.21 Standalone / SQLiteDBs 4.08.20
(27-11-2017, 13:13 PM)Stromag Wrote:  
(27-11-2017, 08:53 AM)Shinoby Wrote:  
(26-11-2017, 16:47 PM)Ibrahim24 Wrote:  I got everything working (finally) but when I try to diagnose my own car I got this: The Programming system could not be initialized. The ISTA installation may be damaged or incorrectly configured. Reinstall ISTA if problems persist contact local support.

I selected the ENET connection but yet I don't see KL15 and KL30
With DR. Gini program I can see 14 volts behind those 2...

Ant idea where I’m doing wrong...?

Same problem. Did the diagnosis with the ENET cable.
[Image: errorF20jp_3606855_28457003.jpg]

The database versions must match

maybe you do not have sdp installed,check under data swi if you have files.
This error results from absence of sdp data or wrong installation place for data_swi.
Quote this message in a reply
27-11-2017, 15:37 PM, (This post was last modified: 27-11-2017, 15:39 PM by Shinoby.)
Post: #73
RE: ISTA-D 4.08.21 Standalone / SQLiteDBs 4.08.20
(27-11-2017, 14:21 PM)pdc Wrote:  
(27-11-2017, 13:13 PM)Stromag Wrote:  
(27-11-2017, 08:53 AM)Shinoby Wrote:  
(26-11-2017, 16:47 PM)Ibrahim24 Wrote:  I got everything working (finally) but when I try to diagnose my own car I got this: The Programming system could not be initialized. The ISTA installation may be damaged or incorrectly configured. Reinstall ISTA if problems persist contact local support.

I selected the ENET connection but yet I don't see KL15 and KL30
With DR. Gini program I can see 14 volts behind those 2...

Ant idea where I’m doing wrong...?

Same problem. Did the diagnosis with the ENET cable.
[Image: errorF20jp_3606855_28457003.jpg]

The database versions must match

maybe you do not have sdp installed,check under data swi if you have files.
This error results from absence of sdp data or wrong installation place for data_swi.
Why need SDP, if I use ENET cable. I think SDP and BLP files need if use ICOM. Or for ENET cable need too?

(27-11-2017, 13:13 PM)Stromag Wrote:  
(27-11-2017, 08:53 AM)Shinoby Wrote:  
(26-11-2017, 16:47 PM)Ibrahim24 Wrote:  I got everything working (finally) but when I try to diagnose my own car I got this: The Programming system could not be initialized. The ISTA installation may be damaged or incorrectly configured. Reinstall ISTA if problems persist contact local support.

I selected the ENET connection but yet I don't see KL15 and KL30
With DR. Gini program I can see 14 volts behind those 2...

Ant idea where I’m doing wrong...?

Same problem. Did the diagnosis with the ENET cable.
[Image: errorF20jp_3606855_28457003.jpg]

The database versions must match
Database - SQLiteDBs?

  • BMW software remote installation via TeamViewer.
Quote this message in a reply
27-11-2017, 16:18 PM,
Post: #74
RE: ISTA-D 4.08.21 Standalone / SQLiteDBs 4.08.20
(27-11-2017, 15:37 PM)Shinoby Wrote:  
(27-11-2017, 14:21 PM)pdc Wrote:  
(27-11-2017, 13:13 PM)Stromag Wrote:  
(27-11-2017, 08:53 AM)Shinoby Wrote:  
(26-11-2017, 16:47 PM)Ibrahim24 Wrote:  I got everything working (finally) but when I try to diagnose my own car I got this: The Programming system could not be initialized. The ISTA installation may be damaged or incorrectly configured. Reinstall ISTA if problems persist contact local support.

I selected the ENET connection but yet I don't see KL15 and KL30
With DR. Gini program I can see 14 volts behind those 2...

Ant idea where I’m doing wrong...?

Same problem. Did the diagnosis with the ENET cable.
[Image: errorF20jp_3606855_28457003.jpg]

The database versions must match

maybe you do not have sdp installed,check under data swi if you have files.
This error results from absence of sdp data or wrong installation place for data_swi.
Why need SDP, if I use ENET cable. I think SDP and BLP files need if use ICOM. Or for ENET cable need too?

(27-11-2017, 13:13 PM)Stromag Wrote:  
(27-11-2017, 08:53 AM)Shinoby Wrote:  
(26-11-2017, 16:47 PM)Ibrahim24 Wrote:  I got everything working (finally) but when I try to diagnose my own car I got this: The Programming system could not be initialized. The ISTA installation may be damaged or incorrectly configured. Reinstall ISTA if problems persist contact local support.

I selected the ENET connection but yet I don't see KL15 and KL30
With DR. Gini program I can see 14 volts behind those 2...

Ant idea where I’m doing wrong...?

Same problem. Did the diagnosis with the ENET cable.
[Image: errorF20jp_3606855_28457003.jpg]

The database versions must match
Database - SQLiteDBs?

Exactly those must match with the version .. Does the error come after reading the error memory?
Quote this message in a reply
27-11-2017, 17:07 PM, (This post was last modified: 27-11-2017, 17:15 PM by Shinoby.)
Post: #75
RE: ISTA-D 4.08.21 Standalone / SQLiteDBs 4.08.20
(27-11-2017, 16:18 PM)Stromag Wrote:  Exactly those must match with the version .. Does the error come after reading the error memory?
Version of SQLiteDBs 4.08.20 correct.
Yes, Error come after reading the error memory.

  • BMW software remote installation via TeamViewer.
Quote this message in a reply
27-11-2017, 17:42 PM,
Post: #76
RE: ISTA-D 4.08.21 Standalone / SQLiteDBs 4.08.20
Yes like Shinoby said.. After reading error memory.
Quote this message in a reply
27-11-2017, 17:43 PM,
Post: #77
RE: ISTA-D 4.08.21 Standalone / SQLiteDBs 4.08.20
You cannot program with enet,with ista just diagnose,with enet do it with esys. ,only with icom,and SDP and BLP are program files so you would need it any way ,independently from interface icom or other.
Maybe that is the reason for your error ,using enet with ista programming.
Quote this message in a reply
27-11-2017, 18:32 PM,
Post: #78
RE: ISTA-D 4.08.21 Standalone / SQLiteDBs 4.08.20
(27-11-2017, 17:43 PM)pdc Wrote:  You cannot program with enet,with ista just diagnose,with enet do it with esys. ,only with icom,and SDP and BLP are program files so you would need it any way ,independently from interface icom or other.
Maybe that is the reason for your error ,using enet with ista programming.
Please read attentively previous my post. I did diagnostic and read errors!

  • BMW software remote installation via TeamViewer.
Quote this message in a reply
27-11-2017, 18:55 PM,
Post: #79
RE: ISTA-D 4.08.21 Standalone / SQLiteDBs 4.08.20
Hi

you do not understand...

You can do diagnostic, but you cannot flash your ecus on the car.
If it is only diagnosis you do not have problems...just the message in the beginning.
Quote this message in a reply
27-11-2017, 19:47 PM,
Post: #80
RE: ISTA-D 4.08.21 Standalone / SQLiteDBs 4.08.20
(27-11-2017, 18:55 PM)pdc Wrote:  Hi

you do not understand...

You can do diagnostic, but you cannot flash your ecus on the car.
If it is only diagnosis you do not have problems...just the message in the beginning.

So that's just a issue we can "skip".
Got it.

One more question, I wanted to diagnose my friends car with a K-Can.
But I just can't seem to make connection.
All I get is:

The Vehicle could not be identified. Please Check the access to the vehicle and check whether the testing-analysis-diagnos has been activated.

After pressing OK I get this:

The program can't start because MSVCP120.DLL is missing from your computer. Try reinstalling the program to fix this problem.

I tried changing the Ediabas setting but yet no connection.

Could someone please show me a direction, please?


Attached Files Thumbnail(s)
       
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,650 627,856 51 minutes ago
Last Post: Sedoy
  ista 4.46 Standalone kiranabc 33 3,084 Yesterday, 19:51 PM
Last Post: Siki78
  ista for use whit vcx se db8000 0 42 Yesterday, 15:28 PM
Last Post: db8000
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 367 Yesterday, 10:39 AM
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,390 27-03-2024, 20:02 PM
Last Post: Node
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,488 27-03-2024, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 131 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 168 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 670 25-03-2024, 08:11 AM
Last Post: Node
XZBMW Ultimate Ediabas/ISTA+ voltage control V3 Node 322 121,520 24-03-2024, 23:45 PM
Last Post: armenh7

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content