[Holzmichl1978]

Hello

I would like to program my CCC Pro from German to Czech.

Has anyone done this before?

Icom ISTA-P and power supply is available

[jararak]

Czech langauge was never been officialy supported, first officialy was NBT

on other hand I have solution, from one member, but not sure how to implement

[osd]

You need custom made CD with software to do that.

[Batje]

Czech is not supported by the CCC.
If you want to change it to another language you can do that with NCS Expert.
1. You can change the language inside the trace file and code it back
-OR-
2. You can change the language variant in the VO and VO code the CCC

But as said, neither of those options will work with Czech language.

[mipe]

Hi Holzmichl1978,

I have a modified service CD for CCC Prof. E90,E60 that includes English, Polish and Czech language.

You must have updated software in CCC to latest version. There will be no voice control because the Czech and Polish voices are not on the installation CD.
Send me a PM.

MiPe

[X-treme]

Czech is not supported by the CCC.
If you want to change it to another language you can do that with NCS Expert.
1. You can change the language inside the trace file and code it back
-OR-
2. You can change the language variant in the VO and VO code the CCC

But as said, neither of those options will work with Czech language.

That's not completely right, For changing main languages on ccc u need to flash the unit either with winkfp or with ista p. On CIC u can code it with ncsexpert.