Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ICOM next a firmware question
13-01-2018, 06:59 AM,
Post: #11
|
|||
|
|||
RE: ICOM next a firmware question
(13-01-2018, 06:37 AM)Loliceman Wrote:(13-01-2018, 06:08 AM)mace0 Wrote:(11-01-2018, 11:34 AM)aknight720 Wrote:(11-01-2018, 04:19 AM)mace0 Wrote:(11-01-2018, 03:00 AM)TurboDriver Wrote: Is it genuine Next or Chinese clone that not Next really? Just tried that and no luck. Have uploaded a screen shot of the DoIP interface if anyone has seen it before... Going to try and do a port scan now and see if it uses a different port, though i can't see anything on the web interface about active ports. I tried it with the older version of ISTA - P and getting more errors than with the newer one, though it still has the original one. The unit itself may actually be faulty despite some functions working. also thanks again for your help. |
|||
13-01-2018, 09:35 AM,
(This post was last modified: 13-01-2018, 12:27 PM by aknight720.)
Post: #12
|
|||
|
|||
RE: ICOM next a firmware question
(13-01-2018, 06:08 AM)mace0 Wrote: Hey, thanks for you reply... that was one of the first things i tried but there isnt anything at that port. I'm going to try a port scanner but there is no info on the DoIP web interface either which is why i am a little stuck. The DoIP interface is just a generic Linux interface where you can update the system Rom/firmware and as far as i can tell its not like the other firmware versions i have found. Itool radar says firmware is revision 1000 (assuming that means 1.0). But have no idea if it always says that or if its accurate. May just be my luck i bought the one dud one on the market. Would buy a genuine one but its a one off diy job so doubt i will be using it again. Are you 100% sure you are connecting to the ICOM IP address? Your screendump would suggest a router IP. EDIT: Can this screendump be the vxdiag web interface? Anyone know? EDIT2: @mace0 I am 98% sure what you have there is an Allscanner VXDIAG VCX NET. Check out http://www.vxdiag.net/?lang=en, download VX Manager and run VCXDoIP Update, that should detect the device and prove my theory. |
|||
Reputation: +1 - mace0 [+1] | |||
13-01-2018, 13:03 PM,
Post: #13
|
|||
|
|||
RE: ICOM next a firmware question
ICOM firmware Works on clone and OEM
Please note that the IP will change after the update. http://169.254.33.45:60080/ http://169.254.58.8:60080/ http://169.254.92.38:60080/ or http://169.254.33.45:58000/ http://169.254.58.8:58000/ http://169.254.92.38:58000/ LOG IN with following Username: root Password: NZY11502 Username: root Password: NZY1150263 In my case, I changed the ICOM's IP address to 192.168.68.40. Use for PC/laptop an IP address from this range: 192.168.68.xxx. Now, I have these for my ICOM: http://192.168.68.40:60080/ http://192.168.68.40:58000/ |
|||
17-01-2018, 03:32 AM,
(This post was last modified: 17-01-2018, 03:41 AM by mace0.)
Post: #14
|
|||
|
|||
RE: ICOM next a firmware question
(13-01-2018, 09:35 AM)aknight720 Wrote:(13-01-2018, 06:08 AM)mace0 Wrote: Hey, thanks for you reply... that was one of the first things i tried but there isnt anything at that port. I'm going to try a port scanner but there is no info on the DoIP web interface either which is why i am a little stuck. The DoIP interface is just a generic Linux interface where you can update the system Rom/firmware and as far as i can tell its not like the other firmware versions i have found. Itool radar says firmware is revision 1000 (assuming that means 1.0). But have no idea if it always says that or if its accurate. May just be my luck i bought the one dud one on the market. Would buy a genuine one but its a one off diy job so doubt i will be using it again. Hey, sorry have been pretty busy but I finally tried the VX manager and it seemed to work, what does that mean and should I update the firmware this way? The device looks like a ICOM (silver one) is listed to work with ISTA but guessing that isn't the case? Seller has agreed to offer a refund but would rather not send it back to china if it can do what I need it to. Thanks again. (13-01-2018, 13:03 PM)qeen Wrote: ICOM firmware Works on clone and OEMI finally got around to doing an SSH (telnet) in to the unit to see what is going on. The IP address it uses is 192.168.8.1 and there is something listening to port 60080 but it isnt HTTP or TELNET for that matter so not really sure what is occupying that port. As for the other 58000 there is nothing listed, a few other ports on there which aren't common i have to get around to trying but so far no luck. Have also tried it all with the unit reserved and free in icom (which appears to work as when its reserved in ISTAP the unit comes up as yellow/occupied). The one thing I can confirm is that the login and password is the second longer password one, which is what i had been using to connect to the system web interface (screenshot in previous post). Unfortunately this doesn't have an option to update the application image, only the system image. And i opened up one of the icom system images online and they are different, so thinking this might even be an imitation icom clone... that looks like one but is actually something else. |
|||
17-01-2018, 06:30 AM,
Post: #15
|
|||
|
|||
RE: ICOM next a firmware question
VXDIAG is supposedly powerful and can emulate ICOM A2. But not sure. Which seller did you get it from so I can avoid them?
|
|||
17-01-2018, 07:29 AM,
Post: #16
|
|||
|
|||
RE: ICOM next a firmware question
(17-01-2018, 06:30 AM)cookiesowns Wrote: VXDIAG is supposedly powerful and can emulate ICOM A2. But not sure. Which seller did you get it from so I can avoid them? Yeah just going to send it back and buy a new one... seller is autoobd2tool2012 on eBay, figured it was one of many on there and at least with eBay. They are forced to give me a refund but i still have to send it back which is great... I have an e90 2008 320i with the DVD based navigation, as far as i can tell i don't have a MOST port, can any one recommend a good clone that will work? If i could afford a genuine one would have just gone with that but after i do all the reflashing doubt I will have a need for it again. It's a long story why I need it to begine with. Any help is appriciated right now. Thanks |
|||
17-01-2018, 09:49 AM,
Post: #17
|
|||
|
|||
RE: ICOM next a firmware question
(17-01-2018, 03:32 AM)mace0 Wrote: Hey, sorry have been pretty busy but I finally tried the VX manager and it seemed to work, what does that mean and should I update the firmware this way? The device looks like a ICOM (silver one) is listed to work with ISTA but guessing that isn't the case? Seller has agreed to offer a refund but would rather not send it back to china if it can do what I need it to. Thanks again. If you do want to keep it, then have a read on that website from where you downloaded VX Manager, you need to run other software before it will EMULATE an ICOM. Out of interest can you post photos of the hardware? |
|||
17-01-2018, 09:56 AM,
(This post was last modified: 17-01-2018, 09:58 AM by mace0.)
Post: #18
|
|||
|
|||
RE: ICOM next a firmware question
(17-01-2018, 09:49 AM)aknight720 Wrote:(17-01-2018, 03:32 AM)mace0 Wrote: Hey, sorry have been pretty busy but I finally tried the VX manager and it seemed to work, what does that mean and should I update the firmware this way? The device looks like a ICOM (silver one) is listed to work with ISTA but guessing that isn't the case? Seller has agreed to offer a refund but would rather not send it back to china if it can do what I need it to. Thanks again. Yeah it seems to be recognized by itools just not in ista/p. It looks exactly like the icom next, genuine silver thing with wifi and the rubber sides... it even comes with the Actia stickers. Apparently it works with other cars brands and stuff I just don't have time to play around with it. I think the work was done this one just didn't work properlly or maybe it didn't like my car model... I sware i saw a page on how to update these somewhere but i cant find it now, it was a page which had instructions on getting it to work with esys, mine is an e90 but still now I know would have been handy. Would you recommend the orange and black icom A2 clones? There is someone that sells them locally. |
|||
17-01-2018, 21:56 PM,
Post: #19
|
|||
|
|||
RE: ICOM next a firmware question
|
|||
12-02-2018, 18:09 PM,
Post: #20
|
|||
|
|||
RE: ICOM next a firmware question
Where I find oryginal and latest ICOM NEXT A firmware?
Login and password are this same as clone one? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content