Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
FRM easy EEPROM recovery
23-11-2017, 21:55 PM,
Post: #11
|
|||
|
|||
FRM easy EEPROM recovery
I just had the time to repair FRM3 with this method, but then how to make software updates in WinKfp to the latest version of software I have a Flash Authorization error.
Have you met with something so that after repairing the FRM module can not do software update? I'm using the latest UPA-USB programmer. I did not have such problems before, and now I have the same in two FRM3 modules. One is from E84 and the other from R56 Regards ARTi |
|||
23-11-2017, 22:52 PM,
Post: #12
|
|||
|
|||
RE: FRM easy EEPROM recovery
(23-11-2017, 21:55 PM)artdesign Wrote: I just had the time to repair FRM3 with this method, but then how to make software updates in WinKfp to the latest version of software I have a Flash Authorization error. EEE wasn't restored properly, had few like that couldn't update at all end it up rewriting donor flush and EE . |
|||
24-11-2017, 08:43 AM,
(This post was last modified: 24-11-2017, 09:00 AM by artdesign.)
Post: #13
|
|||
|
|||
FRM easy EEPROM recovery
When I read pflash from 9224593 I received only size 393216 instead 393280
|
|||
15-02-2018, 11:45 AM,
Post: #14
|
|||
|
|||
RE: FRM easy EEPROM recovery
I read the d-flash of an FRM3R X6 E71, converted to eeprom. everything went fine. now everything works except the driver side power window and the passenger side the door does not lock. any suggestions? should i update the FRM via Winkfp?
|
|||
15-02-2018, 16:50 PM,
Post: #15
|
|||
|
|||
RE: FRM easy EEPROM recovery
Try code it first with NCS
|
|||
16-02-2018, 05:43 AM,
Post: #16
|
|||
|
|||
RE: FRM easy EEPROM recovery
I flashed now with winkfp to latest zusb and coded via NCS. No chance. I got now a dump from other frm (p-flash and eeprom). What's the order to flash?
|
|||
16-02-2018, 20:20 PM,
(This post was last modified: 16-02-2018, 20:22 PM by Hoborg.)
Post: #17
|
|||
|
|||
RE: FRM easy EEPROM recovery
P-Flash , Partition D-flash and write Eeprom , then update with WinKFP , code with NCS Expert and write I-level with Tool32 - that's all.
|
|||
18-02-2018, 11:31 AM,
Post: #18
|
|||
|
|||
RE: FRM easy EEPROM recovery
|
|||
18-02-2018, 16:43 PM,
Post: #19
|
|||
|
|||
RE: FRM easy EEPROM recovery
Yes, ignore D-flash
|
|||
19-02-2018, 10:37 AM,
Post: #20
|
|||
|
|||
RE: FRM easy EEPROM recovery
So, the order is
erase p-flash, write good p-flash dump erase eeprom, write good eeprom dump update with winkfp, code with ncs |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
BMW MD1/MG1 ISN Extractor from EEPROM Dump | Czozen | 39 | 8,473 |
Yesterday, 01:57 AM Last Post: lcy163 |
|
BMW E93 Roc repair eeprom | Pedrom92 | 4 | 294 |
14-05-2024, 17:53 PM Last Post: Superglider |
|
E85 cluster eeprom VIN location | stydly | 3 | 159 |
08-05-2024, 19:47 PM Last Post: gabur431 |
|
CAS2 TO CAS3 EEPROM | DEJMIEN | 9 | 332 |
28-04-2024, 05:58 AM Last Post: 16eddi67 |
|
F10 FRM III eeprom needed for repair | claw | 0 | 95 |
19-04-2024, 16:16 PM Last Post: claw |
|
BMW 420i B48 (2018) EEPROM/full dump | lagunasec | 2 | 183 |
17-04-2024, 17:07 PM Last Post: lagunasec |
|
Eeprom dump needed for EHC E60 | Matthew53 | 0 | 91 |
15-04-2024, 22:27 PM Last Post: Matthew53 |
|
Damaged the EEPROM 95128 in FEM | wxwwxw | 6 | 590 |
08-04-2024, 14:25 PM Last Post: Jumper |
|
mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom | matiz | 10 | 1,640 |
22-03-2024, 11:47 AM Last Post: urgi |
|
Tool for 35160 eeprom | Emmy67 | 19 | 3,027 |
28-02-2024, 13:44 PM Last Post: Adekborys69 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content