Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Mini F56 full update with ISTA+ fail !! All ECU's in red !
|
02-03-2018, 10:03 AM,
Post: #1
|
|||
|
|||
Mini F56 full update with ISTA+ fail !! All ECU's in red !
Hi everyone
i have a mini cooper s f56, i tried to do full update of the car with ISTA+ 4.09.13 I did what ISTA asked to, disable WLAN, connect power supply to computer and car and click on "accept measure plan" and let ISTA work... 10 min after, when i came back to compter, it was sayin "turn off ignition or disable PAD mode",but when i turn ignition off nothing happens in ISTA and KL15 still showing voltage ISTA failed the programming session and now all ECU's are in red except ZGW in blue The car does not start and northing works anymore  Now when i start again ISTA+ to programm the car, it asks me for VO... Can someone help me please If this post helped you don't forget to press rep
 and thanks buttons  |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
02-03-2018, 10:53 AM,
Post: #2
|
|||
|
|||
|
RE: Mini F56 full update with ISTA+ fail !! All ECU's in red !
Try to connect via ESYS and code default values for any ECU. I think car is in transport mode - coding should remove transport mode.
|
|||
|
|
|
02-03-2018, 11:55 AM,
(This post was last modified: 02-03-2018, 11:56 AM by bm92.)
Post: #3
|
|||
|
|||
|
RE: Mini F56 full update with ISTA+ fail !! All ECU's in red !
Thanks but to code ecu they have to answer first....
Only ZGW is responding... First thing i need is VO (vehicule order) on xml file i think If this post helped you don't forget to press rep
and thanks buttons |
|||
|
|
|
02-03-2018, 12:42 PM,
Post: #4
|
|||
|
|||
RE: Mini F56 full update with ISTA+ fail !! All ECU's in red !
(02-03-2018, 11:55 AM)bm92 Wrote: Thanks but to code ecu they have to answer first.... Have You backup of your FA XML? Blue means it is in programming state. What cable You have used for programming? ICOM or ENET? |
|||
|
|
|
02-03-2018, 15:38 PM,
(This post was last modified: 02-03-2018, 15:38 PM by Bimmer540.)
Post: #5
|
|||
|
|||
|
RE: Mini F56 full update with ISTA+ fail !! All ECU's in red !
Ista+ programming only works with Icom...
|
|||
|
|
|
02-03-2018, 17:05 PM,
Post: #6
|
|||
|
|||
|
RE: Mini F56 full update with ISTA+ fail !! All ECU's in red !
Unfortunately i don't have backup of VO
I always use ICOM interface If this post helped you don't forget to press rep
and thanks buttons |
|||
|
|
|
02-03-2018, 17:22 PM,
Post: #7
|
|||
|
|||
|
RE: Mini F56 full update with ISTA+ fail !! All ECU's in red !
If you are comfort with E-SYS try flashing BDC with it. You can use FA-EDITOR to create the FA with some help of a vin decoder.
|
|||
|
|
|
02-03-2018, 19:35 PM,
Post: #8
|
|||
|
|||
|
RE: Mini F56 full update with ISTA+ fail !! All ECU's in red !
Get an icom from somebody and fix that problem
 I would also recomand ussing ISTA+
|
|||
|
|
|
02-03-2018, 23:06 PM,
(This post was last modified: 02-03-2018, 23:08 PM by bm92.)
Post: #9
|
|||
|
|||
RE: Mini F56 full update with ISTA+ fail !! All ECU's in red !
(02-03-2018, 17:22 PM)larshutten Wrote: If you are comfort with E-SYS try flashing BDC with it. You can use FA-EDITOR to create the FA with some help of a vin decoder. nice i did not try this(02-03-2018, 19:35 PM)psya Wrote: Get an icom from somebody and fix that problem Thats what i have, ISTA+ 4.09.13 from this forum and icom latest firmware... If this post helped you don't forget to press rep
and thanks buttons |
|||
|
|
|
03-03-2018, 00:51 AM,
Post: #10
|
|||
|
|||
|
RE: Mini F56 full update with ISTA+ fail !! All ECU's in red !
Did you have router in between?
| BimmerFiks AS | Instagram | F20 114i - Alpine Weiss Retrofits: 609 - 6NS - 6CP - 6WA - 6NW - 674 - - |
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
