Possibly Related Threads…

***ka_rai*** · 27-02-2018, 22:20 PM,

Hi friends

after instal my icom A2 firmrev136 ask update

which update is ok with this version ICOM A2 to use this rheigold 4.09.13 standalone ?

thanks for your help wink

***nek13*** · 27-02-2018, 22:29 PM,

This version really works.
Thanks Spider80 for your effort

***Bimmer540*** · 28-02-2018, 07:13 AM,

(27-02-2018, 22:20 PM)ka_rai Wrote: Hi friends

after instal my icom A2 firmrev136 ask update

which update is ok with this version ICOM A2 to use this rheigold 4.09.13 standalone ?

thanks for your help

https://cartechnology.co.uk/showthread.php?tid=27101

***Spirit5676*** · 28-02-2018, 20:03 PM,

(27-02-2018, 21:49 PM)Spirit5676 Wrote: Here are two ISTA+ log files when I get the Faulty ICOM vehicle connection error

Installing softwares on different laptop solved the issue. I installed both laptops just the same with same files, so I'm not sure what the issue is with the other laptop.

***bm92*** · 01-03-2018, 14:33 PM,

Works perfectly but i have one question, is it possible to program single ECU like before in ISTA P ?
Thanks

***tukan*** · 13-03-2018, 19:03 PM,

(01-03-2018, 14:33 PM)bm92 Wrote: Works perfectly but i have one question, is it possible to program single ECU like before in ISTA P ?
Thanks

There is no solution for programming single module in ISTA+

***ka_rai*** · 13-03-2018, 19:36 PM,

(13-03-2018, 19:03 PM)tukan Wrote:
(01-03-2018, 14:33 PM)bm92 Wrote: Works perfectly but i have one question, is it possible to program single ECU like before in ISTA P ?
Thanks

There is no solution for programming single module in ISTA+

ISTA P can update single ÉCU ?

***tukan*** · 15-03-2018, 06:59 AM,

(13-03-2018, 19:36 PM)ka_rai Wrote:
(13-03-2018, 19:03 PM)tukan Wrote:
(01-03-2018, 14:33 PM)bm92 Wrote: Works perfectly but i have one question, is it possible to program single ECU like before in ISTA P ?
Thanks

There is no solution for programming single module in ISTA+

ISTA P can update single ÉCU ?

Yes

***mr.p*** · 15-03-2018, 20:39 PM,

Hi, i have problem with connection with ENET cable on F30 F32.
With F10 and F01 is good. Where is problem? I understand that the ENET cable works with everyone F-series?

***bm92*** · (This post was last modified: 16-03-2018, 13:58 PM by bm92.)

(13-03-2018, 19:03 PM)tukan Wrote:
(01-03-2018, 14:33 PM)bm92 Wrote: Works perfectly but i have one question, is it possible to program single ECU like before in ISTA P ?
Thanks

There is no solution for programming single module in ISTA+

Damn... too bad...

I got a problem when i want to do measure plan
nothing is written except numbers....

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	ista 4.46 Standalone	kiranabc	73	9,623	1 hour ago Last Post: Cowboy
	ISTA Standalone Licenserequest up to v4.37.4x	Sedoy	8,707	661,573	3 hours ago Last Post: Sedoy
	ISTA+ 4.47.1x Install Files - MEGA	shawnsheridan	11	848	Today, 04:47 AM Last Post: ctgy8923
	ISTA 4.46.xx problems and possible solution	Sedoy	96	11,201	Yesterday, 20:48 PM Last Post: CATAHA
	[MEGA] ISTA 4.32 // ISTA-P 3.72 + ALL LOADER up to 6.6 // no license needed	hashtagmaster	61	18,249	21-04-2024, 22:17 PM Last Post: grizzle
	ISTA SQLiteDBs PL Polish 4.40.12 - 4.40.40	maksymw	3	969	21-04-2024, 12:02 PM Last Post: matigdy
	Update ISTA 4.39.20 SQLiteDBs Italian Language	diman64	10	982	20-04-2024, 11:20 AM Last Post: elettra19
	ISTA+ 4.45.3x Install Files - MEGA	shawnsheridan	10	2,271	18-04-2024, 07:33 AM Last Post: rocdeng
	v4.46.51_PSdZData - Full Version - Torrent	luntik	0	150	17-04-2024, 14:44 PM Last Post: luntik
	ISTA Polish SQLiteDBs 4.45.30 PL	Thomas77	0	135	17-04-2024, 08:38 AM Last Post: Thomas77

Contact Us