1. New Emulator

  2. Immo Bypass

  3. Julie Emulator

  4. AUTO CHIPS



CGDI BMW Keytool Feedback
17-03-2018, 17:31 PM, (This post was last modified: 17-03-2018, 17:49 PM by ROD-BENDERS.)
Post: #1
CGDI BMW Keytool Feedback
All feedback from owners of CGDI BMW keytool post here please guys happy

Tight lines and bending rods are what makes my day biggrin
Zenter Performance tuning yes bow
ADBLUE-DTC-FAP-FLAP-EGR-IMMO-LAMBDA-TQM-TPROT-VMAX-SPECIAL here: bowtime
skype: PM
Reputation: +2 - CHIKODIAG [+1] , raffy haddad [+1]
Quote this message in a reply
[-] The following 10 users say Thank You to ROD-BENDERS for this post:
  • achraf, antonypaul, CHIKODIAG, Chipshop, Cniksor, Gabriel87, Kenny, raffy haddad, Silva1337, volavka
19-03-2018, 11:04 AM,
Post: #2
RE: CGDI BMW Keytool Feedback
(17-03-2018, 17:31 PM)ROD-BENDERS Wrote:  All feedback from owners of CGDI BMW keytool post here please guys happy

Excellent tool so far. no bricks or problems.

extremely fast for cas1, 2 & 3

for cas3+ if need downgrade 10 minutes and seems safe, ISN read from DME 10 minutes does not support all DME is down side.

make sure you have proper power on the car

cas4 /+ did not check.
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[-] The following 6 users say Thank You to ahmadarifai for this post:
  • antonypaul, Cniksor, JarsaR, Kenny, MasterA2L, ROD-BENDERS
19-03-2018, 15:59 PM, (This post was last modified: 19-03-2018, 16:00 PM by slaw1971.)
Post: #3
RE: CGDI BMW Keytool Feedback
cas4 F10 - ok (new key)
cas4+ F10 - ok (new key) isn from org key or dump DME
fem/bdc F31 - ok - reset mileage, change isn, change vin, make keys with oryginal key and with dump from DDE
cas3+ E60- ok , downgrade and make key with isn from org key
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[-] The following 7 users say Thank You to slaw1971 for this post:
  • abdoo, antonypaul, Cniksor, HeXeN, Kenny, MasterA2L, ROD-BENDERS
20-03-2018, 07:30 AM,
Post: #4
RE: CGDI BMW Keytool Feedback
i was thinking of getting this tool, i currently have ak90 mainly for ews4 and multi tool v7.7 i use for cas. i want to be able to make cas4 as well so i think cdgi would be good for me.

questions. on tool info it says supports bmw key unlock, does that mean i can reuse a old key and reprogram it?

also how safe if downloading for cas3+, i only ran into this issue one time and i did not downgrade as worried mess things up. im curious how well this programmer works. if anyone who has this doesnt mind me messaging them with questions ill appreciate it.
Quote this message in a reply
03-04-2018, 06:20 AM,
Post: #5
RE: CGDI BMW Keytool Feedback
(20-03-2018, 07:30 AM)Cniksor Wrote:  i was thinking of getting this tool, i currently have ak90 mainly for ews4 and multi tool v7.7 i use for cas. i want to be able to make cas4 as well so i think cdgi would be good for me.

questions. on tool info it says supports bmw key unlock, does that mean i can reuse a old key and reprogram it?

also how safe if downloading for cas3+, i only ran into this issue one time and i did not downgrade as worried mess things up. im curious how well this programmer works. if anyone who has this doesnt mind me messaging them with questions ill appreciate it.
Yes, you can reuse an old key and reprogram it.
and yes it is safe if downgrade for CAS3+.
Please believe me.cheers
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[-] The following 4 users say Thank You to sunshine2018 for this post:
  • ahmadarifai, Cniksor, Kenny, ROD-BENDERS
07-04-2018, 06:06 AM,
Post: #6
RE: CGDI BMW Keytool Feedback
So I purchased the cgdi programer. I figured out how make key for cas2-3 but I can’t figure out how to use this programer for cas4? I tried looking online but only find for cas3,no instructions for cas4, can anyone tell me steps for cas4 I have f10 I can try one.
Quote this message in a reply
07-04-2018, 07:22 AM,
Post: #7
RE: CGDI BMW Keytool Feedback
(07-04-2018, 06:06 AM)Cniksor Wrote:  So I purchased the cgdi programer. I figured out how make key for cas2-3 but I can’t figure out how to use this programer for cas4? I tried looking online but only find for cas3,no instructions for cas4, can anyone tell me steps for cas4 I have f10 I can try one.
Cas4 can only be done by reading DFlash from Freescale cpu then load into programmer software and generade key. It can no ne done by obd.

You need xprog or vvdi prog to read the dflash.

Sent from my Pixel 2 using Tapatalk
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[-] The following 2 users say Thank You to rautolock for this post:
  • Kenny, ROD-BENDERS
10-04-2018, 21:47 PM,
Post: #8
RE: CGDI BMW Keytool Feedback
CGDI BMW need to pay every 6 month subscription same as CGDI Mercedes ?
Quote this message in a reply
11-04-2018, 06:55 AM,
Post: #9
RE: CGDI BMW Keytool Feedback
(10-04-2018, 21:47 PM)HeXeN Wrote:  CGDI BMW need to pay every 6 month subscription same as CGDI Mercedes ?

no
work like VVDI2 - synchronization every mounth
Quote this message in a reply
[-] The following 1 user says Thank You to slaw1971 for this post:
  • HeXeN
12-04-2018, 15:27 PM,
Post: #10
RE: CGDI BMW Keytool Feedback
Can you tell me if CGDI has same or more functions than vvdi2 bmw activation? thanks
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Updated HEXTAG By Microtronik Support / Feedback volavka 103 14,207 53 minutes ago
Last Post: laso
0Immo Xhorse vvdi2 tool Technical Support & Feedback volavka 164 54,010 19-02-2020, 07:13 AM
Last Post: tschek
  Key Master/Key Master DP FEEDBACK mar.wo 30 7,987 17-02-2020, 19:10 PM
Last Post: geneluauto
XZBMW Xhorse vvdi bmw tool Technical Support & Feedback huzionet 31 3,194 12-02-2020, 19:39 PM
Last Post: mircea13
0Immo VVDI PROG Support/Feedback Thread Czozen 244 65,437 02-02-2020, 11:57 AM
Last Post: evaldazj
0Immo Renolink Support/Feedback volavka 23 5,410 25-01-2020, 09:23 AM
Last Post: fantomel
  W906 ALL KEYS LOST KEY COLLECTION ON BENCH CGDI HELP iky786 5 260 06-01-2020, 07:56 AM
Last Post: Dash_Burner
  FVDI Feedback / questions and answers klostazy 360 97,523 26-12-2019, 09:44 AM
Last Post: ltakiky
  VVDI2 Support/Feedback Thread volcano1980 1 285 20-10-2019, 10:58 AM
Last Post: volavka
XZBMW CAS3 DOWNGRADE cgdi SUCCESFUL subaru76 8 981 10-08-2019, 07:17 AM
Last Post: subaru76

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content