Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ ISTA-P not reading central encoding code
|
10-04-2018, 13:22 PM,
(This post was last modified: 10-04-2018, 23:27 PM by Clusters.)
Post: #1
|
|||
|
|||
|
ISTA-P not reading central encoding code
I'm getting the following error when I try to connect to a E60:
The vehicle order central encoding code nto be read from the vehicle. The selected model series group is 'E60'. This selection mighty have been incorrect. ISTA-P reads the short vin and shows the correct series. Firewall off and antivirus off. ISTA-D reads the car normally. Using ISTA-P 3.62.3, I'll try the newer 3.64, but ISTA-P 3.62.3 worked just fine on E65. Using ICOM A2. Anyone got any ideas what could be causing this? |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
10-04-2018, 13:25 PM,
Post: #2
|
|||
|
|||
|
RE: ISTA-P not reading central encoding code
yes i same problem.
|
|||
|
|
|
10-04-2018, 16:45 PM,
(This post was last modified: 10-04-2018, 16:47 PM by Spirit5676.)
Post: #3
|
|||
|
|||
|
RE: ISTA-P not reading central encoding code
Got it sorted, someone had f**ked up the VO.
|
|||
|
|
|
10-04-2018, 17:26 PM,
Post: #4
|
|||
|
|||
|
RE: ISTA-P not reading central encoding code
If VO stored in FRM differs from one stored in CAS that's what happening in ista..
|
|||
|
|
|
10-04-2018, 17:51 PM,
Post: #5
|
|||
|
|||
|
RE: ISTA-P not reading central encoding code
|
|||
|
|
|
10-04-2018, 19:24 PM,
Post: #6
|
|||
|
|||
|
RE: ISTA-P not reading central encoding code
In pre LCI (VFL) there is also FA in LMA module, correct me if I'm wrong.
|
|||
|
|
|
10-04-2018, 19:36 PM,
Post: #7
|
|||
|
|||
|
RE: ISTA-P not reading central encoding code
The E60 FA / VO is only in
CAS and LMA annual production does not matter but probably someone wrote incorrect connect under NCS and check if it reads your FA If my post helped you hit the thanks and reputation button!
 |
|||
|
|
|
10-04-2018, 20:29 PM,
Post: #8
|
|||
|
|||
|
RE: ISTA-P not reading central encoding code
check them with ncs if you not sure let me use teamviewr
|
|||
|
|
|
10-04-2018, 20:42 PM,
Post: #9
|
|||
|
|||
|
RE: ISTA-P not reading central encoding code
My bad, I meant CAS and LMA. Anyways both had the same faulty FA. Fixed the FA with NCS and after ISTA-P worked just fine to update car.
|
|||
|
|
|
11-04-2018, 05:30 AM,
Post: #10
|
|||
|
|||
|
RE: ISTA-P not reading central encoding code
Sh*tty app, like iCarly, change VO when You code some things with that. Then is impossible to read with ISTA-P.
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
