Possibly Related Threads…

***23Andi23*** · (This post was last modified: 12-05-2018, 07:37 AM by 23Andi23.)

(12-05-2018, 06:38 AM)bmwadriatic Wrote:
(11-05-2018, 21:46 PM)Gabriel87 Wrote: For e60 use pullup resistance 225ohm

Sorry, but what does this mean? Read and write possible via OBD2 ?

Pull Up Resistor = Interface resistor, it varies some electrical communicating parameters on the K-line between the tool and the engine control unit.

You can set Pull Up Resistor in Setup on K-Line ECU´s

***zenter performance*** · 14-05-2018, 16:14 PM,

(05-05-2018, 21:47 PM)Remap Ross Wrote: zenter perforrmance its not nice to laugh at others misfortune because they did not use your guy! whether right or wrong

fault wasn't in kess or ksuite and rework was done by a long standing member on here

i get ask for files and tools and ansfer !!! i never write buy from this or enother person .... but now i see why i get negative and from what user ....all because chinese tools ....

***Remap Ross*** · 14-05-2018, 18:56 PM,

(14-05-2018, 16:14 PM)zenter perforrmance Wrote:
(05-05-2018, 21:47 PM)Remap Ross Wrote: zenter perforrmance its not nice to laugh at others misfortune because they did not use your guy! whether right or wrong

fault wasn't in kess or ksuite and rework was done by a long standing member on here

i get ask for files and tools and ansfer !!! i never write buy from this or enother person .... but now i see why i get negative and from what user ....all because chinese tools ....

whether you wanted to sell or was just advising on options is between you and the OP! my comment was at the laughing on sum ones post. whilst i know the feeling after i advise some one and they dont listen,then it goes wrong i dont think its good etiquette to post such things.

and u must have upset another member to get negative rep.

UPDATE tool is working and test on a few ecus so far
good day all

***zenter performance*** · 14-05-2018, 20:33 PM,

(14-05-2018, 18:56 PM)Remap Ross Wrote:
(14-05-2018, 16:14 PM)zenter perforrmance Wrote:
(05-05-2018, 21:47 PM)Remap Ross Wrote: zenter perforrmance its not nice to laugh at others misfortune because they did not use your guy! whether right or wrong

fault wasn't in kess or ksuite and rework was done by a long standing member on here

i get ask for files and tools and ansfer !!! i never write buy from this or enother person .... but now i see why i get negative and from what user ....all because chinese tools ....

whether you wanted to sell or was just advising on options is between you and the OP! my comment was at the laughing on sum ones post. whilst i know the feeling after i advise some one and they dont listen,then it goes wrong i dont think its good etiquette to post such things.

and u must have upset another member to get negative rep.

UPDATE tool is working and test on a few ecus so far
good day all

Im happy im not tools reseler smile

and good all go good smile

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	L-Suite 1.03v2 - working checksume correction + instruction	CenturionM	5	2,310	8 hours ago Last Post: CenturionM
	Need working hour reset via dump MG1CS003 B48	Jordiano	0	34	11-06-2024, 11:28 AM Last Post: Jordiano
	Decoding Kess VR files	rehatflogs	0	79	06-06-2024, 10:46 AM Last Post: rehatflogs
	kess v2 clone - support write me7.1.1 ?	CenturionM	1	70	03-06-2024, 21:08 PM Last Post: CenturionM
	Change CID SD card kess V2	TTk	3	1,147	27-05-2024, 06:18 AM Last Post: evgenijm
	Red pcb kess 5.017 sd card image (files)	stunt_rider	16	14,026	26-05-2024, 09:28 AM Last Post: little john
	Request: How to write to tuned EDC17CP20 only TprotOff file via Kess to OBD	Zamperl	2	160	20-04-2024, 10:34 AM Last Post: Zamperl
	Who can rework ORIGINAL KESS V2	pluto2013	7	2,064	15-04-2024, 17:43 PM Last Post: mdanilo
	[Request] Ksuite 2.23 for reworked Kess and KTAG	Jordiano	0	195	30-03-2024, 10:17 AM Last Post: Jordiano
	Bmw e88 msv 80 reset working hours	Hakhamanesh	1	170	25-03-2024, 19:50 PM Last Post: BmwMerc

Contact Us