Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Clone med17.9.8 kia
25-06-2018, 21:37 PM,
(This post was last modified: 06-07-2018, 23:17 PM by Clusters.)
Post: #1
|
|||
|
|||
Clone med17.9.8 kia
Through Ktag. I have cloned a med17.9.8. I have not had any error. The replacement ecu now does not start and it gives me an error of mcu. Do I have to modify the files?
|
|||
26-06-2018, 06:41 AM,
(This post was last modified: 26-06-2018, 06:41 AM by ROD-BENDERS.)
Post: #2
|
|||
|
|||
RE: Clone med17.9.8 kia
(25-06-2018, 21:37 PM)PUMUKY Wrote: Through Ktag. I have cloned a med17.9.8. I have not had any error. The replacement ecu now does not start and it gives me an error of mcu. Do I have to modify the files? Did you modify the files in the OTP areas ? If not this could be your problem All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need. |
|||
Reputation: +1 - PUMUKY [+1] | |||
26-06-2018, 07:30 AM,
(This post was last modified: 26-06-2018, 07:35 AM by PUMUKY.)
Post: #3
|
|||
|
|||
RE: Clone med17.9.8 kia
No, I just read the original ECU with KTAG, and the same files I wrote in the other ECU.
How do I modify those files? and what should be modified? Do you mean to have made immo off ?, Is there no way to keep the immo? Thank you (26-06-2018, 06:41 AM)ROD-BENDERS Wrote:(25-06-2018, 21:37 PM)PUMUKY Wrote: Through Ktag. I have cloned a med17.9.8. I have not had any error. The replacement ecu now does not start and it gives me an error of mcu. Do I have to modify the files? No, I just read the original ECU with KTAG, and the same files I wrote in the other ECU. How do I modify those files? and what should be modified? Do you mean to have made immo off ?, Is there no way to keep the immo? Thank you |
|||
26-06-2018, 08:09 AM,
Post: #4
|
|||
|
|||
RE: Clone med17.9.8 kia
On kia/hyundai no need to clone, just use gds to adapt donor ecu. Only thing you need is pin from donor and from ori. Can get pin here on the forum or at local kia dealer.
|
|||
Reputation: +1 - PUMUKY [+1] | |||
26-06-2018, 08:33 AM,
Post: #5
|
|||
|
|||
RE: Clone med17.9.8 kia
(26-06-2018, 08:09 AM)X-treme Wrote: On kia/hyundai no need to clone, just use gds to adapt donor ecu. Only thing you need is pin from donor and from ori. Can get pin here on the forum or at local kia dealer. I have the pins, but how should I do it? Also, I have GDS. Can you indicate the procedure in GDS ?. Thank you |
|||
26-06-2018, 16:52 PM,
Post: #6
|
|||
|
|||
RE: Clone med17.9.8 kia
When replacing a ecm on a Hyundai or Kia you need to place the donor ecm into neutral mode. which is done with GDS. The donor ecm can be installed in the vehicle that requires the donor ecm. Then you need to go into immobilizer, and it will list you Password teaching/ changing, Neutral Mode, Limp home mode, Smartra Neutral Mode,Teaching. You first need to choose Neutral mode and it will ask for the PIN code, here you need to enter the pin code based on the donor's ecm vin's PIN. Once that's entered then you need to choose Smartra Neutral mode and it again will ask you for a PIN... that pin is based off the vehicles vin (car that requires the ecm/"NOT" the donar ecm's vehicle's vin) PIN code. Then you can verify that the immobilzer data shows ecm-neutral and smartra-neutral. Next you need to learn the keys with Password teaching. Keep in mind the new vin will be whatever the used donar ecm car shows, unless you change that with a different method.
|
|||
26-06-2018, 18:19 PM,
Post: #7
|
|||
|
|||
RE: Clone med17.9.8 kia
(26-06-2018, 16:52 PM)X-treme Wrote: When replacing a ecm on a Hyundai or Kia you need to place the donor ecm into neutral mode. which is done with GDS. The donor ecm can be installed in the vehicle that requires the donor ecm. Then you need to go into immobilizer, and it will list you Password teaching/ changing, Neutral Mode, Limp home mode, Smartra Neutral Mode,Teaching. You first need to choose Neutral mode and it will ask for the PIN code, here you need to enter the pin code based on the donor's ecm vin's PIN. Once that's entered then you need to choose Smartra Neutral mode and it again will ask you for a PIN... that pin is based off the vehicles vin (car that requires the ecm/"NOT" the donar ecm's vehicle's vin) PIN code. Then you can verify that the immobilzer data shows ecm-neutral and smartra-neutral. Next you need to learn the keys with Password teaching. Keep in mind the new vin will be whatever the used donar ecm car shows, unless you change that with a different method. You refer to the neutralization mode of the smart keys, and then make learning of the new keys. I've seen that in the options in GDS 1. Module Smart Key/ Smart Key Unit 2. Vehicle Sw manager 3. Neutatralization. Is correct? |
|||
02-07-2018, 19:10 PM,
(This post was last modified: 06-07-2018, 19:45 PM by PUMUKY.)
Post: #8
|
|||
|
|||
RE: Clone med17.9.8 kia
(26-06-2018, 16:52 PM)X-treme Wrote: When replacing a ecm on a Hyundai or Kia you need to place the donor ecm into neutral mode. which is done with GDS. The donor ecm can be installed in the vehicle that requires the donor ecm. Then you need to go into immobilizer, and it will list you Password teaching/ changing, Neutral Mode, Limp home mode, Smartra Neutral Mode,Teaching. You first need to choose Neutral mode and it will ask for the PIN code, here you need to enter the pin code based on the donor's ecm vin's PIN. Once that's entered then you need to choose Smartra Neutral mode and it again will ask you for a PIN... that pin is based off the vehicles vin (car that requires the ecm/"NOT" the donar ecm's vehicle's vin) PIN code. Then you can verify that the immobilzer data shows ecm-neutral and smartra-neutral. Next you need to learn the keys with Password teaching. Keep in mind the new vin will be whatever the used donar ecm car shows, unless you change that with a different method.I have made your steps, but it still does not start. I have several tests and I do not know why I still do not start, The DTC that gives is P0606 MPC error. I have tried several files modified by me, such as TPROt off and inmo off, but it still does not start. I have also stolen to program the keys, and it does not start either. Can you check the files? Thank you |
|||
03-07-2018, 17:07 PM,
Post: #9
|
|||
|
|||
RE: Clone med17.9.8 kia
Tried to just clone eeprom? Sometimes it works.
But not shure on kia |
|||
03-07-2018, 17:40 PM,
Post: #10
|
|||
|
|||
RE: Clone med17.9.8 kia
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
EDC17/MED17 Checksum algo | racing | 36 | 26,282 |
11-04-2024, 13:21 PM Last Post: danyguit2000 |
|
Audi A4 B8 2008 edc17cp14 clone | 34ko | 7 | 189 |
11-04-2024, 07:52 AM Last Post: ROD-BENDERS |
|
Ecu Bench Tool 2.1.5.6 (AMT BST Clone) what do you think ? | ROD-BENDERS | 136 | 19,261 |
08-04-2024, 18:40 PM Last Post: raffy haddad |
|
PSA MED17.4.4 | Jacce75 | 2 | 110 |
02-04-2024, 08:29 AM Last Post: Jacce75 |
|
OriginaL/Clone PCMFLASH Questions/Answers | volavka | 133 | 50,593 |
01-04-2024, 13:17 PM Last Post: al70 |
|
MED17.1.1 Funktionsrahmen FR | Jannik07 | 0 | 51 |
31-03-2024, 13:54 PM Last Post: Jannik07 |
|
hyundai med17.9.8 cat off | aladinnu | 1 | 79 |
26-03-2024, 14:55 PM Last Post: giiintas |
|
renault trafic3 clone ecu | Albert-M | 2 | 101 |
26-03-2024, 11:47 AM Last Post: JV22 |
|
NOX OFF MED17.7.3 MB | patrickshani31 | 1 | 102 |
26-03-2024, 10:39 AM Last Post: patrickshani31 |
|
med17.2 dtc delete 2a63 | TilQ34 | 1 | 94 |
20-03-2024, 16:56 PM Last Post: BmwMerc |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content