Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA+ Programming Expertmode (How to enable?)
|
29-05-2017, 17:50 PM,
Post: #21
|
|||
|
|||
|
RE: ISTA+ Programming Expertmode (How to enable?)
Same i-level or other i-level does not mather. Simple story: When you retrofit nbt in a car that came with factory cic and you startup ista/p or ista+ for programming it Will tell you to replace the nbt because it does not belong in the car. With ista/p there is expert mode So you can just "ignore" the replacement and update all the other modules without any trouble. If you read the ehole threat you should understand this Better!
Cheers! |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
29-05-2017, 18:00 PM,
Post: #22
|
|||
|
|||
|
RE: ISTA+ Programming Expertmode (How to enable?)
Ok i understand now the problem
 i am going to study that problem better.. |
|||
|
|
|
15-07-2017, 07:30 AM,
(This post was last modified: 15-07-2017, 07:31 AM by tonemoz.)
Post: #23
|
|||
|
|||
|
RE: ISTA+ Programming Expertmode (How to enable?)
With ISTA/P 3.62 it may still be possible to work with the omitted model series via input of an ibac code, I will test further when I have the chance.
|
|||
|
|
|
15-07-2017, 11:42 AM,
Post: #24
|
|||
|
|||
RE: ISTA+ Programming Expertmode (How to enable?)
(15-07-2017, 07:30 AM)tonemoz Wrote: With ISTA/P 3.62 it may still be possible to work with the omitted model series via input of an ibac code, I will test further when I have the chance. but only for fiber optic modules, right? Please, Press the Buttons
![[Image: postbit_thx.gif]](https://cartechnology.co.uk/images/CarTechnologyTheCure/english/postbit_thx.gif) and ![[Image: postbit_reputation.gif]](https://cartechnology.co.uk/images/CarTechnologyTheCure/english/postbit_reputation.gif) if This post help or is usefull for you! Not is needed write just only thanks in Threads  |
|||
|
|
|
15-07-2017, 18:19 PM,
Post: #25
|
|||
|
|||
RE: ISTA+ Programming Expertmode (How to enable?)
(15-07-2017, 11:42 AM)ruben_17non Wrote:(15-07-2017, 07:30 AM)tonemoz Wrote: With ISTA/P 3.62 it may still be possible to work with the omitted model series via input of an ibac code, I will test further when I have the chance. I believe that after inputting the correct ibac code then full vehicle treatment would continue as in previous versions of ISTA/P. This will help with expert mode function for modified vehicles (6NS for example) |
|||
|
|
|
15-07-2017, 21:44 PM,
Post: #26
|
|||
|
|||
|
RE: ISTA+ Programming Expertmode (How to enable?)
IBac can be generated. It's provided with bb88 loader.
|
|||
|
|
|
15-07-2017, 21:53 PM,
Post: #27
|
|||
|
|||
|
RE: ISTA+ Programming Expertmode (How to enable?)
|
|||
|
|
|
16-07-2017, 14:41 PM,
(This post was last modified: 16-07-2017, 14:46 PM by DNK76.)
Post: #28
|
|||
|
|||
|
RE: ISTA+ Programming Expertmode (How to enable?)
IBACgenerator
Password to extract, 7-zip din76 |