[ajpds]

Just got a clone VCM II, and then I installed (VMware) IDS V105 and V107.
IDS detected the VCM II just fine, the lights light up correctly, but when I plugged it into my 2015 Ford
Focus it would not detect the PCM to establish any communication.

Thanks in advance.

[Merseycruise]

Just got a clone VCM II, and then I installed (VMware) IDS V105 and V107.
IDS detected the VCM II just fine, the lights light up correctly, but when I plugged it into my 2015 Ford
Focus it would not detect the PCM to establish any communication.

Thanks in advance.

Try using an older version of the IDS program. It’s possible that your serial number has been blocked on the late versions.

[Extradry]

Hi

Can you see your VCM 2 in VCM manager software that comes with IDS ?

[ajpds]

Hi

Can you see your VCM 2 in VCM manager software that comes with IDS ?

yes…..

[koziol]

i have same problem
Cant get this to communicate with car. IDS start fine
when trying to connect to car light on interface blinking like they should
i see also red interface in right lower corner but no success no communication
any solution for that.
Can see VCM 2 in VCM manager

[Merseycruise]

i have same problem
Cant get this to communicate with car. IDS start fine
when trying to connect to car light on interface blinking like they should
i see also red interface in right lower corner but no success no communication
any solution for that.
Can see VCM 2 in VCM manager

What version of IDS ?

[bradsbadluck]

your vcm2 is blacklisted, u need to use a vcm2 patch or older firmware. there is a way around it, but you have to know what to do to get it working

[bar94]

Or if you have service personnal Ford can upgrade your VCMII in new firmware and working fine