Possibly Related Threads…

***Simple*** · (This post was last modified: 07-09-2018, 15:59 PM by Simple.)

DiagBox v9.23 is already cracked and someone on a French site is selling the license for 30 Euros..

***cro1983*** · 12-09-2018, 14:24 PM,

(07-09-2018, 15:58 PM)Simple Wrote: DiagBox v9.23 is already cracked and someone on a French site is selling the license for 30 Euros..

Where can it be downloaded?

Clusters · (This post was last modified: 14-09-2018, 23:21 PM by Clusters.)

Simple, did I read a post you made somewhere that you could only confirm the last version that telecoding works with was 7.62?

Has that changed at all?

(12-09-2018, 14:24 PM)cro1983 Wrote:
(07-09-2018, 15:58 PM)Simple Wrote: DiagBox v9.23 is already cracked and someone on a French site is selling the license for 30 Euros..

Where can it be downloaded?

Not sure if this is it.

***Simple*** · (This post was last modified: 14-09-2018, 18:25 PM by Simple.)

Yes, DiagBox v7.62 was the last that release that can Telecode all cars released prior to 7.62. Later (reconfigured) DiagBox releases had issues with some cars.

I expect that v9.23 will Telecode all cars released before it, later fixes were released for DiagBox 9.xx that may have an issue.

However, I usually participate in software that is reconfigured to help others and for fun.

***cro1983*** · 21-09-2018, 17:21 PM,

I get these message when I want open link

Code:
Invalid Thread specified. If you followed a valid link,

(14-09-2018, 16:33 PM)lvlacleod Wrote:
(12-09-2018, 14:24 PM)cro1983 Wrote:
(07-09-2018, 15:58 PM)Simple Wrote: DiagBox v9.23 is already cracked and someone on a French site is selling the license for 30 Euros..

Where can it be downloaded?

Not sure if this is it.

23-09-2018, 21:30 PM,

Simple, is there any way to enable telecoding for 7.83? 7.62 is to old to recognize many stuff for my Peugeot 308 T9.

***Simple*** · 24-09-2018, 08:20 AM,

No it is not too old and there are ways, but you need someone committed to doing it as it takes for ever. especially when you don't have a test bed.

I put a lot of time into it and encouraged other to share, but you review the thread I posted and the size of contributions.

I believe that what I have written (in the Telecoding Thread) is most of the work, and there is a small piece (probably the code of the car etc..) to finish it.. But then, someone or some others need to put some time into it and test it, to get results.

26-09-2018, 07:48 AM,

Looks like the thread has been deleted.

(21-09-2018, 17:21 PM)cro1983 Wrote: I get these message when I want open link

Code:
Invalid Thread specified. If you followed a valid link,

***stjansdal*** · 04-10-2018, 05:45 AM,

Hi

PP2000 is not working.

How to activate it ?

10-10-2018, 01:58 AM,

I get error "the application failed to initialize properly" and a black screen in diagbox after update 8.11-8.14. Can't figure out why

Nevermind, I had forgotten to install Net Framworks. I wish you could delete your own comment in this forum!

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	diagbox 9.173	sharawi	2	139	21-04-2024, 14:31 PM Last Post: justdiag
	PSA Diagbox VCI Interfaces	alexturbo	18	6,795	27-12-2023, 21:45 PM Last Post: apol
	DIAGBOX 2021 9.85 FULL INSTALATION	akli	6	2,739	26-12-2023, 20:21 PM Last Post: Le-Mans
	DIAGBOX online	walczaklu	10	8,682	03-12-2023, 12:57 PM Last Post: mattydr67
	DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet)	Simple	33	35,616	22-11-2023, 06:16 AM Last Post: Jeppo
	Diagbox 9.129 activation request	dadoa4	4	2,433	09-11-2023, 09:59 AM Last Post: bovhec
	diagbox 9.150	stasi	5	2,273	16-09-2023, 19:41 PM Last Post: stasi
	DiagBox Language Change	Simple	16	17,446	14-09-2023, 10:01 AM Last Post: żarówka
	Citroen C5 2008 electric handbrake calibration and installation procedure	roanoke	1	359	07-08-2023, 08:23 AM Last Post: michalez
	DIAGBOX help needed installing	mars2moon	4	1,036	23-07-2023, 18:45 PM Last Post: J415UNNY

Contact Us