[tste1982]

All seems to be fine. In ISTA+ I noticed that EPS has been added and does not responce (which is clear since it does not exist on Fxx xDrive models). 

How did you solve this? I flashed a EGS of a 640d Gran Coupe with typecode 5D51 yesterday, and now it also shows EPS and TMS which are not responding.

Is there a workaround? 

Regards

[Clausi821]

Hello,
 
I tried on our F11 535d 05/11 299PS to flash the Alpina software.
 
I added the 920, 9XA in the FA. The type code on XA71 and the Production date changed to 1211.
 
I have:
SVT_Is read and saved
SVT_Soll calculated and saved
Valley calculated and stored
Expert module -> Tal processing -> Tal, SVT and FA deposited.
 
But then most of my options are gray out.
 
Can someone help me?
What am I doing wrong?
 
Best regards
 
clausi

[user_530d]

Hello,
test it with XB71 not XA71.

[Typergaz]

    Ive finally got round to doing my 435d gc, the sw number was 210B though not 210C, but it all seems to be working ok

[F32_PiccoloPiccolo]

Has anyone flashed a 650i model (F06,F12,F13) with the Alpina B6 tranmission software?

[Clausi821]

Hello,
test it with XB71 not XA71.

Hello, even with the change from XA71 to XB71, nothing has changed.
Does anyone have time to help me this evening or another info?

Best regards 
clausi

[user_530d]

Hello. PM sent.

[B5M3W5d]

Hello, even with the change from XA71 to XB71, nothing has changed.
Does anyone have time to help me this evening or another info?

Best regards 
clausi

I'll leave here what I wrote for other users and let's see if it works:
You don't need to write VO on VCM. You have to edit VO and add 920 and 9XA, change production date to 1211 or higher (I've used 1211) and change typschlüssel to XA71 or XB71 (XA for F10 and XB for F11). Save it as FA Alpina (or anything you'd like). Go to TAL Calculation, load the Alpina FA, activate FP, read SVT and save it, tick Complete flash, on I-step (shipment) I've selected 11-12-520, but you just need to select anything higher than 11-09-507, calculate SVT target and save and calculate TAL.
If you need any help after that let us know.
Good luck!

[teaml]

hi there,
what would be the Typeschlussel for F31 330XD (RHD)
would this work 3L52.

thanks

[teaml]

I flash already 535d xDrive, 435d xDrive, 335d, 330d and my 330d xDrive to the Alpina EGS.
You mustnt edit the Typenschluessel. Only the VO, i-Stufe and the production Date are important.

i have F31 330d xdrive production date 07/13. So what production date do i need to change it to, and 
i-step (shipment) level is  F020-13-07-506. 

any help. 
Please

thanks