[TurboDriver]

Anyone can get FSC code for MPPK for G30? Looking into instructions for MPPK conversion FSC code is required. Anyone has done it?

[BMWzone]

Anyone can get FSC code for MPPK for G30? Looking into instructions for MPPK conversion FSC code is required. Anyone has done it?

This is a not repair code, must be generated by Monaco and will be debited at dealer

[BMWzone]

but it will haven't power increase,
on ISTA it will have fault with power reduction due to lack of activation code

[TurboDriver]

Yes I understand it does need FSC code for MPPK conversion but dealers price is sick for this upgrade

[davidoff86]

Get yourself a custom tune. You'll get 2-3x the power increase of the MPPK and for about 1/3 of the price (running around $500/£500 last time i checked!)

If you're concerned over warranty, go for a respected outfit that do a CUSTOM tune with dynos, not an off the shelf re-sold map. And ask them to dial it back a little - if you have a x40i engine for example, you can get ~ 420bhp with a good tune and the right fuel, but if you ask for ~400bhp it'll put less stress on the engine. (the B58 is good for a fair more than that anyway!)

[FSCmap]

It is possible to flash MPPK without FSC and it works as from factory.
Without any problems.

[TurboDriver]

I can flash DME with MPPK software but then Drive train fault appear due to missing FSC. Just curious how to work it around

[masa52]

ask someone for repair fsc's for your car and restore fsc

[TurboDriver]

ask someone for repair fsc's for your car and restore fsc

it's not a part of repair pack. MPPK FSC is ordered individually.

i'm pretty sure the software can be edited so it doesn't ask for FSC

[masa52]

if its ordered individually by BMW all repair fsc are to download including mppk
all fsc's ordered by BMW are stored in one place factory and individual fsc