Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
16-11-2018, 03:24 AM, (This post was last modified: 16-04-2019, 15:11 PM by medianjoe.)
Post: #1
YTMercedes  VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
Xentry PassThru needs to be installed on Windows x64 to support new models, such as Euro5/6, W205, W213, W222 ... However, VAS5054A didn't work on 64bits as passthru. There was 64bits device driver for VAS5054A but there was no PassThru driver working on 64bits. This is a 64bit device drivers along with a patched PassThru API files working on Windows 10 x64. Xentry recognizes it and works with W205 (confirmed), etc.

[Image: attachment.php?aid=93284]

WARNING: Use it on your own risk, only for test purpose.


What you need:

(1) VAS5054A hardware.
(2) (option) VAS5054A EDIC_PDU_API 1.20.4x driver installation file. You can find it somewhere on this forum (see below).
(3) (option) New firmware. The firmware included here is version 1.20.41 for better compatibility, not 1.20.42.
(4) Softing_VAS5054A_PassThru_Driver_x64_v3.zip (attached here)
(5) 64bit Windows 10
(6) (option) DC 12V 1A power adapter, 2 jumper wires for temporary power.

Pre Installation:

(1) Install Xentry PassThru and all patches.
(2) (option) Install EDIC_PDU_API 1_20_42 driver (or EDIC_PDU_API 1_20_41). It's for installing .NET framework or VC++ redistribution files.  

If you are going to do clean install on fresh Windows 10, you might want to install the EDIC_PDU_API driver. It installs .NET framework, VC++ files, some EDIC DLLs on /Windows/System32 or SysWow64. Other files will be overwritten by the following manual installation. If you don't know where to find it, one version is (here) or there.

Installation:

(1) Copy "Program Files (x86)\Softing\*" to your HDD "C:\Program Files (x86)\Softing\*"
(2) Copy "Program Data\D-PDU API" to your HDD "C:\Program Data\D-PDU API".
(3) Double click on "Softing_VAS5054A_PassThru_1_20_042.reg" and install it.
(4) Make a shortcut of "SftngCM.exe" on Desktop. 
(5) Right click on "C:\Program Files (x86)\Softing\EdicDriver\win7\softingedic7_ntamd64.inf" and install.
(6) Connect the VAS5054A hardware using an USB cable. Connect it to a temporary power(12V DC adapter) or OBD-2 port of your vehicle.
(7) Check "Control Panel/Devices Manager/Softing...". If it's not installed correctly, update the device driver manually.
(8) Make a shortcut of "EDICConfig.exe" on Desktop.
(9) (option) If you have newer version than EDIC_PDU_API 1_20_42 driver and genuine VAS5054A hardware, you may install the API driver now.

Post Installation:

(1) Connect the VAS5054a to a temporary power(12V DC adapter) or ODB-2 port of your vehicle.
(2) Run "SftngCM.exe" on desktop as administrator. Make a "C:\Temp" directory if not exists. This is for saving log files. If not exists, SftingCM.exe will cause error when doing test.
(3) Choose "VAS5054A" and type the serial number (maybe 0821xxxxx).
(4) Select "Test" and click on "Start Test". 
    - RED dot : PC <-> VAS5054A does not communicate. Something wrong on your driver.
    - YELLOW dot : PC <-> VAS5054A communicates.
    - GREEN dot : PC <-> VAS5054A <-> Vehicle communicates.

Tip:

(1) ".NET Framework 2.0/3.0/3.5" needs to be installed if not installed automatically. You can install it by selecting on "Control Panel/Programs and Features/Turn Windows features on or off/.NET Framework 3.5(includes .NET 2.0 and 3.0)". You also need to install VC++ redistributions if not done yet. (MSVCR100.dll, mfc100.dll, ... errors)

(2) Temporary power to VAS5054A for test purpose : Ground to either pin 4 or 5. 12V DC to pin 16. 

(3) You can upgrade the EDICDriver in "Program Files (x86)\Softing\EDICDriver" if you have newer version. Update the device driver on control panel.

(4) If you installed newer version EDIC_PDU_API driver than 1.20.42, edit the *.reg and change the number 1_20_42 to your number (for example, "EDIC_D_PDU_API_1_20_042" to "EDIC_D_PDU_API_1_20_0XX"). After editing, double click on it and install it again. 

(5) If your device has different serial number but SftngCM.exe doesn't allow the change, edit the *.reg file with text editor, double click on it and install it again. 


[Image: attachment.php?aid=80725]


Press THANKS and REPU if it helps you.


Attached Files Thumbnail(s)
       
Softing_VAS5054A_PassThru_Driver_x64_v3.zip
File Type: .zip
Downloaded: 1,816 times
Size: 14.41 MB

Reputation: +50 - Dash_Burner [+1] , pesona [+1] , liusberg [+1] , hsw1009 [+1] , Twoone [+1] , lijingpei2782 [+1] , namda [+1] , emaflo1978 [+1] , felixeu [+1] , mdanilo [+1] , ernesto125 [+1] , kadoemon [+1] , MilenaG [+1] , zmann [+1] , euror [+1] , jasiek77 [+1] , smlee747 [+1] , MB_Star [+1] , ross2018 [+1] , nedved59 [+1] , winter [+1] , grabbelmanko [+1] , LUCAS45 [+1] , ACloneHasNoName [+1] , BS68 [+1] , rejovi [+1] , aleshiro [+1] , kregiel [+1] , ptserwis [+1] , gaintp [+1] , B4RTJ [+1] , apple [+1] , RReader [+1] , Erron [+1] , Joe2 [+1] , wellwell [+1] , paino [+1] , stasi [+1] , edd.edd [+1] , kostasxy [+1] , aaronpaul [+1] , serhion [+1] , odessit7 s pentagona [+1] , racasnar [+1] , Samsara69 [+1] , stojke260 [+1] , leandro65 [+1] , Accrosgreen1975 [+1] , bursuc [+1] , firas [+1]
[+] 131 users say Thank You to medianjoe for this post
17-11-2018, 21:57 PM,
Post: #2
RE: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
If you are going to do clean install on fresh Windows 10, you may need to install the EDIC_PDU driver first. It installs .NET framework, VC++ files, some EDIC DLLs on /Windows/System32 or SysWow64. Other files will be overwritten by the above manual installation. If you don't know where to find it, one version is (here) or there.
[+] 2 users say Thank You to medianjoe for this post
23-11-2018, 14:46 PM,
Post: #3
RE: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
it works for me, thanks !!
[+] 1 user says Thank You to filipe08 for this post
23-11-2018, 16:57 PM,
Post: #4
RE: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
Nice biggrin ..I didnt noticed there are mising cars on x86 sistem..where is the problem when try to diag w205 and others mentioned?did you test all functions (coding,programing,live data) with x64 bit driver?thanks
[+] 1 user says Thank You to rs@chip for this post
24-11-2018, 20:53 PM,
Post: #5
RE: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
(23-11-2018, 16:57 PM)rs@chip Wrote:  Nice biggrin ..I didnt noticed there are mising cars on x86 sistem..where is the problem when try to diag w205 and others mentioned?did you test all functions (coding,programing,live data) with x64 bit driver?thanks

I tested TCU(YGS, Y3/8n4)/SAM(A80)/garage door opener(A67n2)/Audio(Garmin Map), all worked. It also communicated with all 40 modules without any issues. Live data works. Programming works. I didn't have chance to test coding yet.

Maybe someone could patch Xentry to support the models on x86 but making a PassThru device work on x64 was easier for me.
Reputation: +1 - rs@chip [+1]
[+] 1 user says Thank You to medianjoe for this post
01-01-2019, 13:32 PM,
Post: #6
RE: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
i become error code 50 can someone help ?
02-01-2019, 16:03 PM,
Post: #7
RE: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
I bought VAS5054a with OKI chip and AMB2300.
I try my veihcle in W212 (MY2015).
Connection and short test worked perfectory via both USB and Bluetooth.

Thanks! Very useful this topic.
[+] 1 user says Thank You to kadoemon for this post
03-01-2019, 12:55 PM,
Post: #8
RE: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
(02-01-2019, 16:03 PM)kadoemon Wrote:  I bought VAS5054a with OKI chip and AMB2300.
I try my veihcle in W212 (MY2015).
Connection and short test worked perfectory via both USB and Bluetooth.

Thanks! Very useful this topic.

How to set up bluetooth connection for VAS5054a?
04-01-2019, 03:30 AM, (This post was last modified: 04-01-2019, 03:31 AM by kadoemon.)
Post: #9
RE: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
Hi piktas

I reference this video.
https://www.youtube.com/watch?v=ePIQLwg96x8



1.Pairing device and assign for COMport from windows.
   (note. Device need disconnect via USB when pairing device)
2.Run "EDIC Hardware Installation.exe" and ADD device.
(see picture)
   
3.Run "EDIC Configuration Manager.exe" and confirm assigned COM port in bluetooth.
(see picture)
   

4.Run "SftngCM.exe" and connection test. So green signal is OK.

I'm hoping that this will be helpful.
[+] 2 users say Thank You to kadoemon for this post
07-02-2019, 10:18 AM,
Post: #10
RE: VAS5054A PassThru Driver for Xentry PassThru on Windows 10 x64
Tested on W164 via USB connection, all works.


Possibly Related Threads…
Thread Author Replies Views Last Post
YTMercedes New 2024 xentry KG? Rik 9 1,325 Yesterday, 20:50 PM
Last Post: djtosko
YTMercedes Xentry New Long Key (original key) 1st web free service pesona 1,584 148,051 26-03-2024, 20:25 PM
Last Post: Delphi2002
YTMercedes HHT-Win 64bit With Xentry XDOS 2023.03 One Click JackyTran 6 1,568 26-03-2024, 16:21 PM
Last Post: Djkalash
YTMercedes How to Install Xentry PassThru 03.2022 Flawlessly margut 1 1,630 23-03-2024, 15:29 PM
Last Post: head
YTMercedes Xentry Passthru 06.2023 J2534 Openport VCX + Keygen pitercie 2 473 23-03-2024, 15:29 PM
Last Post: head
  Xentry 2024.03 - PT & XDOS renia1983 19 2,106 17-03-2024, 19:35 PM
Last Post: gcs190
YTMercedes XENTRY DAS Activation Here takis 2,422 618,143 15-03-2024, 10:24 AM
Last Post: Mario68
  03 2024 Xentry Final version ross2018 9 904 14-03-2024, 23:37 PM
Last Post: connector
YTMercedes XENTRY AIO FULL FIX [2023.09-R2 & 2023.12-R2] [UPDATED 21/12/2023] crypt0ninja 153 30,432 06-03-2024, 17:32 PM
Last Post: db8000
  Xentry 09/12.2021 WIFI Solution gcs190 11 4,815 29-02-2024, 13:33 PM
Last Post: gcs190

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content